Question about 1990 Mercedes-Benz E-Class

1 Answer

1990 MERCEDES-BENZ E CLASS

Is there any interlockilg device ?

Posted by on

  • grsivaram May 11, 2010

    Thanks please send diagrams to sivaram@streamyx.com.my. I did manage to
    free the leaver by pushing the igniton sw cable cam at the gear leaver
    side. I get a rattling sound now when the car is in D . holding the
    selector shift to the right stops the noise. Is there a bush at the
    bottom of the leaver.

    Thanks for your very useful advise. sivagr



×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 241 Answers

Yes
Adjusting
Selector lever
Move to position "P" and turn ignition key to position "0".
Ball nipple of cable (40B) Cable
Clip in and insert into holder.
Cable (40B)
Pull jacket in direction of arrow until lock lever (44B) rests against the cam (48).
Ball nipple of cable (40L)
Clip in and insert.
Cable (40L)
Pull jacket in direction of arrow until lock lever (44L) rests against cam (48) and tighten retaining bolt to 5 Nm .

NOTE: The cables are bolted to the steering lock and hooked onto the brake pedal operating lever. They are routed securely to the floor-mounted shift control without kinks.

Testing After Adjustment
Ignition key in position "1" and brake pedal depressed > or = 25 mm :
The locking levers (44B) and (44L) must disengage fully from the cam (48) so that the selector lever handle can be moved to position "N" without resistance. The parking lock is unlocked.
Brake pedal not depressed:
Move selector lever handle from position "N" to position "P" and turn ignition key to position "0": the locking levers (44B) and (44L) must engage in the cam (48). The parking lock is operative. Press on protective cap.
i need your email address to send you an image.
i need the exact model of your car
300e,190e, etc..

Posted on Jun 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vibe DG-478


Why didn't you read the instructions?

Pairing Bluetooth Devices

Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).

Posted by Andrew... on Nov 19, 2016

Dec 10, 2016 | Cars & Trucks

1 Answer

Audio on aux device


Connect a 3.5 mm (1/8 in) cable
from the auxiliary device to the
auxiliary input jack. When a
device is connected, the system
automatically begins playing audio
from the device over the vehicle spekers.

Mar 11, 2016 | 2012 Buick LaCrosse

1 Answer

P0826 Nissan - Rogue 2009


P0826 Nissan - Manual Mode Switch Circuit
Possible causes: - Faulty Manual mode select switch (Built into control device, shifter)
- Faulty Manual mode position select switch (Built into control device, shifter)
- Faulty Control Device (Shifter)
- Control Device harness is open or shorted
- Control Device circuit poor electrical connection

When is the code detected? When an impossible pattern of switch signals is detected, a malfunction is detected.

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)

P0826 Nissan Description: Manual mode switch is installed in shift control device. The manual mode switch sends shift up and shift down switch signals to Transmission Control Module (TCM) with Control Area Network (CAN) communication.

TCM sends the switch signals to combination meter via CAN communication line. Then manual mode switch position is indicated on the shift position indicator.

P0826 Nissan Manual Mode Switch Circuit

May 31, 2015 | 2009 Nissan Rogue

1 Answer

I need to refresh my signal


turn off the portable device and turn back on. check the wifi setting on the portable device.

May 08, 2015 | 2006 Jeep Wrangler

1 Answer

Cds not loading into the device


No reset. The problem is internal. If it a high dollar stereo, fix it or have it fixed. If it s factory, replace it.

Dec 26, 2014 | 2003 Honda Accord

1 Answer

Sync instructions


press the phone button, use the tune knob to get to bluetooth device, and delete devices, press OK. when you go back into the phone, it will ask to add a device. Search for bluetooth device with your phone, enter PIN. Done.

Jul 19, 2014 | 2009 Ford Escape

1 Answer

Car won't crank


Find the passtime device , it's usually under the dash near the ignition switch. You can trace it by following the wire from the remote eye. There are 5 wires with a plug connector plugged into the device. Leave the red, pink and black wires alone. The blue wire comes from your ignition switch and goes to a relay switch inside the device. The purple wire comes from that switch to your starter.
Leave them cut from the device, but solder, (or connect in some manner) them together so that the passtime device is bypassed. Then your starter will get power when you turn the key. That's all there is to it.
the passtime device will still appear to be functioning. It will beep and take codes from the remote, but regardless of whether it is timed out or not your starter will still get power.

Sep 29, 2017 | 1998 Ford Taurus

Not finding what you are looking for?
1990 Mercedes-Benz E-Class Logo

243 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Marvin
Marvin

Level 3 Expert

85111 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...