Question about 2002 Toyota Tacoma

2 Answers

I have error codes of p1300,p1305, p1310, p1315, on my toyota an am looking for the deffinations and issues thse codes create. I have a 2002 tacoma.

Posted by on

  • Anonymous Mar 21, 2014

    el carro enciende y se apaga y marca error en los codigos p1300 p1305 p1310 p1315

  • Scott Randall
    Scott Randall Apr 23, 2014

    I had to share with other DIY. I had p1300, 1305, 1310, 1315, 1320, and 1325. All searches told me I had dead coil/igniter problems in all six cylinders. If that was not the problem, then it had to be the engine control module. Adding up the dollars I contemplated junking my 2000 Avalon. On a whim I went to the fuse box under the hood and looked for any relay that sounded like it may be igniter related. There was one relay called IG2. I replaced it with the relay next to it and the car fired right up after 3 days of struggles.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 1 Answer

P1300 = ignition system malfunction (#1 coil/igniter circuit fault)
P1305 = same as above but #2 coil
P1310 = #3 coil
P1315 = #4 coil

Posted on Dec 19, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Turn on the A/C and the compressor coil will not pull in. Jump out 30 and 87 and the compressor will work. A/C on idiot light lights when the switch is pushed.

Posted on Jul 26, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix fault code p1300 and p1305 on my toyota progres?


the fault codes are for a misfire problems check the ignition system like spark plugs/on plug coils you dont say the what engine in your vehicle so not easy to answer your question in more detail

Feb 23, 2018 | Toyota Cars & Trucks

2 Answers

P1300,p 1305,p1310,p1315 how do i fix these fault codes on a Occasionally stall & engine check light on.


You have an at times fault which is loss of spark on all four cylinders. Worse case is the engine control module (quite expensive) so lets keep that for last cause. If it were to fail it would more than likely 100% of the time. Therefore the most likely causes are either a dirty connector or loose ground. See image 1&2 below to uncover coil on plugs. locate connector plugs common to all four plug wires. There are two junction connectors A & B. With key off remove connectors, check for bent pins and spray with DOXIT a radio shack product that is a great No Touch pin cleaner. Replace connectors. One wire from each of the four coil on plug wires leads back to the ECM (Electronic Control Module) Connector A (it is labeled). disconnect and perform same procedure using spray. Reconnect...you'll need to clear codes by disconnecting positive battery terminal for 3 minutes. Test run vehicle to see if troubles have cleared...If not; do you have a multimeter and a wee bit of experience using one? If so put on lowest ohm setting...Hold one terminal on the negative battery terminal...right on the post...Hold the other on bare metal of chassis as in fender...record reading...While holding lead on battery terminal move the other lead to metal of engine block...record readings...Must be close to zero ohms about 1 to 200...If readings are around 2000 ohms the car has an inadequate ground...If so send me a message...saailer@ec.rr.com














25689133-it05lymtu1334i4my0oofgx5-1-1.gif

25689133-it05lymtu1334i4my0oofgx5-1-3.gif

p1300-p-1305-p1310-p1315-fix-fault-codes-fsiw50wukvgddzmkmreyzoen-5-3.gif


I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

May 10, 2015 | 2003 Toyota Corolla

1 Answer

How to fix the the p1300 p1310 codes to a Toyota Camry 2001le4cl


Ok for code p1300 replace ignition coil 1 and 4 cilynder and for p1310 replace ignition coil 2 and 3 cilynder

Mar 03, 2015 | Toyota Cars & Trucks

1 Answer

Code p1300


Possible causes
- Ignition Coil No. 1 harness is open or shorted
- Ignition Coil No. 1 circuit poor electrical connection
- Faulty Ignition Coil No. 1
- Faulty Engine Control Module (ECM)

Feb 01, 2015 | 1997 Toyota Tacoma

1 Answer

Toyota corolla 1997 engine code p1300 ignitor circuit malfunction #1 car starts after 2 minutes will stop


Error Code P1300/ 14. Igniter signal malfunction No.1
Problem Areas:
IGNITION SIGNAL--NO "IGF" SIGNAL TO ECU
--IGNITER/IGNITER CIRCUIT
--IGNITER AND IGNITION COIL/CIRCUIT
--IGNITION AMPLIFIER/ DISTRIBUTOR.
--ECU

Oct 18, 2013 | Toyota Corolla Cars & Trucks

1 Answer

Code p1315


DTC P1315 is Igniter Circuit Malfunction (No.2).
Check No. 2 ignition coil.
See the link below for more information from a 2000 to 2002
Toyota Echo Service Manual.
Diagnostics: Engine: P1300, P1305, P1310, P1315 Igniter Circuit Malfunction (Echo)

Hope that helps.

Sep 19, 2013 | 2001 Toyota Echo

2 Answers

P1300,p 1305,p1310,p1315 how do i fix these fault codes on a Toyota echo 2005.


P1300 Igniter Circuit Malfunction / 14
P1305 Igniter No. 2 Circuit Malfunction / 15
P1310 Igniter No. 3 Circuit Malfunction /15
P1315 Igniter No. 4 Circuit Malfunction

444a5478-5b0c-4e6e-8a98-e031ba8bc972.png

Jan 07, 2013 | 2005 Toyota ECHO

1 Answer

I am getting codes P0300, P0302, P1300, P1305 and P1310 - I recently replaced the spark plugs (less than a week ago). Thinking it might be the coil in cylinder 2, I purchased a new one and installed it...


What is P1300,1305 1310 on a Toyota

They are MFG Specific

Get them and I will try and offer some suggestions

302 is #2 but Iam thinking if you find that
those other codes are Cam Sensors, then
we will discuss that

Mar 19, 2011 | Toyota Corolla Cars & Trucks

1 Answer

Occasionally stall & engine check light on.code read p300 misfire


Sent is just now. Let me know if you get it. GLad to help, and Thanks for choosing FixYa!

Nov 19, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
2002 Toyota Tacoma Logo

9,578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...