SOURCE: What size A/C belt does a Mazda 3 use?
It is Unusual to have a Belt "Size" As the Belt Size is determined by the Application, Why a Parts store Cant Get this Info By Use of > Year-Make-Modle-Engine Size is VERY Unusual. Try Another Parts Store, or try this Info.
NOTE: You Did Not Say Engine SIZE so this is for the 2.3L Engine
This Info is for the " 2.3L " Engine
Parts Information
Part
OEM Part
Price
Drive Belt
Serpentine Belt
Manual Trans
L373159099U
$26.99
Notes
Auto Trans
L37215909A9U
$26.99
Notes
AC Belt
LF5015908
$19.95
Notes
Labor
Skill
Level
Mfg.
Warranty
Standard
Drive Belt
Replace
AC Belt
C
0.0
0.5
Notes
Serpentine Belt
C
0.4
0.6
Notes
SOURCE: Battery warning light just started
a battery waring ligth is not telling you that the battery is defective, it is telling u that the battery is not being charged by the alternator, have the battery and alternator tested to determine th4e cause, a failing battery many times can damage the alternator as it causes it to overheat, so if the alternator is in need of replacing then it is very important that the battery be fully charged and tedsted prior to installing a new alternator if indeed that is the final diagnosis.
SOURCE: looking for front end parts diagram for 2006 mazda tribute
buy manual, clean or replace speed sensor at wheels
SOURCE: gas pedal unresponsive
Try this: Go to your local parts store and purchase a can of (throttle body cleaner) you will take your air filter out and remove the big tubing that is connected to your throttle body and filter housing. Spray the cleaner inside the throttle body, open the (butterfly) and spray around the pivot the butterfly opens and close on. What happens is you get carbon build up in these areas and it causes the gas pedal to feel like it's stuck and have to apply more pressure to the pedal. You will see alot of black carbon run out of the throttle body. Take a clean rag and wipe down the area of the throotle body. Repeat the cleaning 1-2 times. put your air inlet tubing back on and re-install your filter. It may seem hard to start at first but it's drying out the cleaner that was sprayed inside the body. Try this and see if this works. I've done this on many vehicles that shops want to charge $300 to do and all you need is $5 cleaner. It's very easy to do and takes 20 min.
SOURCE: back window wiper won't work ,05 mazda tribute.don't have manual
Start with the basics. could be something as simple as the fuse. I have a 03 Tribute so i guess it is the same model as yours! if so. The fuse can be found in the fuse box in the passenger footwell. There is a small inspection plastic cover in the kick panel. if you un clip the cover, on the reverse side you will find a tool that clips onto the mini blade fuses to extract them (very useful). Also on the reverse side of the cover is a list of the fuses and to what it relates. The rear wiper fuse from memory is approx a 1/4 of the way down the left column of fuses 10A but just confirm on the list. Mini blade fuses are usually coloured but transparent so you will be able to see if the fuse element is still in tact, but always best to double check with a continuity meter. Hope this helps. Simon.
126 views
Usually answered in minutes!
×