2000 Volkswagen Passat 4Motion Logo

Related Topics:

Posted on Sep 02, 2017

Auto transmission problems, i have reverse and drive but the lower gears dont seem to work ie 1,2,3 and the tip tronic also does not work, and also the gear display on the dash does not work to tell you what gear your in, the drives footwell was flooded so ive unblocked the problem and dried the carpet out can any one help please. ps this is a auoto tip 2000 model vr5 passat.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Jul 17, 2008

SOURCE: VW Passat transmission

I got same problem now. Did you find a Solution or figure out why transmission will not engage after being towed. Same engine works great just won't shift in to gear and go.

Thanks john

Ad

Anonymous

  • 1586 Answers
  • Posted on Aug 12, 2008

SOURCE: Reverse gear has grinding noise...?

Have them flush the fluid out under warranty and put in new fluid, and have them bleed the clutch lines in case air is getting in there. Audi and VW claim lifetime transmission fluid but it's BS - I've changed relatively low mile fluid from these cars and it was horrendous. It's possible that the fluid itself is causing trouble, but it's more likely that it is a synchro problem. If it was a clutch issue, you should have problems with more than just reverse gear - a clutch simply engages and disengages the engine and transmission, regardless of which gear it is. The problem (if not fixed by fluid) is in the transmission, and being under warranty, don't accept another "suggestion" like they're giving you. Changing your clutch isn't gonna do it.

phaley187

  • 7 Answers
  • Posted on Oct 20, 2008

SOURCE: drivers footwell full of water ( not flood damage )

check the drain tube outlet on the bottom of the car, that drains the AC. It could have become plugged. If that fails to clear up the problem, then you'll have to check the heater core... But you would be smelling coolant.

Anonymous

  • 114 Answers
  • Posted on Apr 24, 2009

SOURCE: reverse gear pops out

Umm crazy people in here! First things I would check engine mounts and the alignment and condition of the shift linkage The last two are more likley Find a Good vw garage in your town one with a good rep. They would know how to check it out correctly

Anonymous

  • 1 Answer
  • Posted on May 28, 2009

SOURCE: Water continously leaks from the horse that house the sensor of my Volkswagen VR5 Passat model 1999

i had same prob but it wasnt hose it was themostat housing. i just change thermostat housing assembly on my 96 passat. It was cracked where i couldnt see till i got it off. cost about 70 bucks at vw dealer(new bolts, seals and housing.). Not a hard job if last owner didnt strip allen heads, grrrrrrr!!!!! I put new back in about 45 min. hope it helps. drove me crazy!!!!!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Jimny suzuki not engaging, seems neutral always. What seems to be the problem?

welcome to usa forum, we dont have Jimny here.
but car is kind simular to a vitara.
no year stated, so that makes real accurate answers impossible.
no transmission stated. or engine size

is it a stick or auto trans?
is car 2wd or 4wd?

is the lever stuck in nutural.?
or is the lever working right but the transmission fails in all gears and reverse.
mine has stick and 5 speeds, and reverse so has 6 gears to try.
If an automatic? trans. check the levels. per the operators guide do not guess.
and change its filter, if never done.
if automatic, make sure the lever moves its cable and the other end of cable is still attached to the trans lever. on the box.
they both move same amount, (cable drive does that)
if not the cable is bad, or bits there.
0helpful
1answer

Transmission started slipping then lost all gears except reverse

Needs a rebuild or replace with a refurb or go to junk yard. I would say replace the bands but it sounds like it's pretty toasted
0helpful
1answer

1995 celica 2.2L doesn't engage gear 2,4,r

are you saying this car is a A/T car, AUTO and not a stick?

say so, as both have 2,4 and reverse gears.

i think its a 5speed manual.

so the tip of the shifter is bad, remove it see plastic parts bad.

you could shift car , by moving the transmission levers and id bet it does work so that leaves. bad shift lever parts.

i bet the lever is real loose , so loose the H pattern is garbage
right> ?
0helpful
1answer

My 1996 sentra auto dont want to move in forward gears when cold

Hi Allen,is is real cold there,you may need to use a thicker transmission fluid.
0helpful
2answers

I have a 1998 Oldsmobile Bravada auto trans drive works fine but no reverse

Are you sure you have all 4 forward gears? Most of the time a no reverse condition also means 1st and 3rd only.No 2nd or 4th.If you dont have all the forward gears as i suspect , the reaction shell is stripped or broken.If you do have all the forward gears then these are the two most common reasons you do not have reverse.1 reverse input clutches are damaged or burnt 2 forward cltches have slipped to the point they are welded together causing a mechanical bind in reverse and also causing the transmission to pull forward in neutral.Let me know if i can help.Good Luck.
0helpful
1answer
1helpful
1answer

2000 KIA Spectra/Shuma 1.5 Auto Transmission not changing gear. Hi, My auto transmission just started giving problem 2 days ago. First time I notice the problem is when moving off from stop in "D", the...

It is the prnd indicator switch on the shift shaft of the transmission,or a shift solenoid,or the valves are sticking in the valve body,try some lube guard,added to the transmission,it is great for stuck valves.
0helpful
1answer

Transmission problem in 2006 mazda 6

If you have gone to a shop to have your transmission maintained, I would get them on the phone immediately. Foreign cars, especially shiftronic trans. usually use different fluids. If they have put the wrong fluid or forgotten a filter, etc., you may have a destroyed system. Double check with your fluid type and the type inserted in your vehicle.
0helpful
1answer

Transmission stays in one gear

I just had this same problem yesterday, thouh I have a 98 A6 2.8 . With mine. The engine was sending air flow metering fault codes to the ecm. Then the electronics in the transmission reads the codes then puts the transmission into 'limp mode'. The tiptronic didn't work, All the gear selection lights on the dash display stayed lit. And when the car is shut down and restarted, If you try to drive it, the vehicle stays in third gear. This has happened twice in the life of the car.
You could always take it to a dealer where they'll help you unload some piles of cash the 401k plans didn't take. But I would start by taking a personal hand held scanner and make a log of the stored codes. Then, with the scanner you can reset and delete these codes. Then as with mine. All your problems go away. If they come back, at that point visit you local dealer.
0helpful
2answers

1998 clio 1.6 auto......loses forward drive but reverse is ok and sometimes goes in gear and is ok then after a few yards loses it again

Hmmm, Seems like one of two things
1- Transmission gearing going bad, talk to AAMCO they can rebuild auto tranny's for about a grand or so.
2-torque converter has lost it, but that would also affect reverse.
Not finding what you are looking for?

71 views

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Bradley
Bradley

Level 2 Expert

105 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...