Question about Dodge Grand Caravan

1 Answer

Check eng. light is on and the gauges arnt working

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The engine light came ON.Whenever the check engine light comes on then that is the indication of error codes stored in cars computer.In this case the car needs to be scanned at car diagnosis center to retrieve the codes.Once the error codes are received the exact faulty part can be replaced as per the codes./You can get the car scanned at your local car garage,if they do the diagnostic check for the care.But if there is no place near by your area to do the diagnostic check,then at www.autozone.con service center its absolutely free to get car scanned.And also at autozone they deal will car parts so you can get the parts replaced from autozone if required. ------------------ The check engine light ON means it can be any thing faulty /loose which is not getting detected by the cars computer.Every electrically controlled part in your car is controlled/detected by the computer.So if any of the part connection gets loose or that part itself gets faulty/short then computer will not see/detect that part and so this check engine light comes ON. ------------ This will help.Thanks.

Posted on Oct 22, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure sending unit located in a '01 dodge dakota, 4.7 eng.?


go to CTC and buy a service manual for 2001 dodge Dakota 4.7 litre engine there will be 2 oil pressure sending units one that is for the gauges in the dash and the other for the oil pressure sending unit mounted on engine

Feb 12, 2015 | Dodge Cars & Trucks

1 Answer

06 Hyundai santafe Dtc p0320. Rpm dont work in dash car runs.


Check the fuses as well as the actual rpm gauge, make sure they arnt blowin out as well

Dec 07, 2013 | Cars & Trucks

1 Answer

Speedometer quit working, check enging light is on as well as other light gauges lit up. vehicle in limp mode now


When the check engine light is On it indicates that car's computer (ECM) has detected fault in some part of your car and its information is stored in them in the form of error codes.

These codes can be retrieved by performing a scan on your car which will give you the exact fault and the solution.

The problem of speedometer not working can be because the speed sensor has failed or the gauge itself is faulty.

Jan 04, 2011 | 2005 Saturn VUE

2 Answers

All my lights work except for my running lights.


they are powered together so check the fuses, some will be under the hood and some inside the cab, the covers will have a list of fuses and amperage.

Nov 29, 2009 | 1992 Nissan Pickup

1 Answer

Check gages light is on


the check gauges light means exactly that, look at your gauges, there is something wrong, look all the gauges when the engine is running, usually the temp gauge is to high, is the vehicle overheating, is the check eng. light on, make sure all the gauges are reading normal, the check gauges light is there to get your attention, see what it wants.

Oct 21, 2009 | 2001 Dodge Durango

1 Answer

Blower fan has no output. Temp guage not working


for blower motor check fuse hvac 20a int.panel and hvac 30a fuse in elect.center eng.compartment,if ok,check for 12v at blower connector if power is there fan is defect..temp.gauge check connection at unit if ok check resitance if it varies when engine warms up,if it doesnt vary replace unit,if it varies check wiring circuit,unit is place at drivers side of eng.block near sprk plugs.for hard to start;if check eng.light is not on could be in need of a tune-up depending on how long ago it was done,if check eng light is on or was on scan ecm for trouble code.

Oct 03, 2009 | 1999 Chevrolet Blazer

1 Answer

Check eng light came on '05 jetta tdi


it should be near a coolant hose or your water pump

Jun 19, 2009 | 2005 Volkswagen Jetta

1 Answer

2003 Ranger Edge Fuel gauge


CHECK ENGINE LIGHT ON READS FUEL SENSOR
AND 5 CYLINDER

Dec 31, 2008 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

Marvin
Marvin

Level 3 Expert

85160 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...