SOURCE: Brake Rotor Replacement Ford Escort 1997
The rotor is not held on by the big nut, it slides on and off, only the wheel holds it on, the clearance between the rotor and the front hub which the large nut holds on is very small, rust forms and the rotor gets stuck, use a hammer or a large piece of wood if you plan to reuse the rotor and hit it from side to side, spray penetrating oil to loosen the rust, it is a bugger but it will come loose, then make sure to wire brush all the rust off or wheel retention may be compromised.
SOURCE: 2203 Chevy Impala - vibrations under braking - front left.
I love this car can i please have it
SOURCE: 1994 Chevy van brakes grabbing
try replacing the brake hoses they may have a restriction causing
SOURCE: replace front brakes and rotors
first take off wheels, then check if it is a star screw or a normal bolt, then remove the bottom bolt, remove the top bolt, and take the caliper off to access the pads and to remove the rotors, then back together the way it came apart with some anti seize on the face and bolts. Sometimes you have to pound the old rotors off...
SOURCE: ABS light on 97 chevy blazer after replacing front rotor.
check the sensor wiring and mounting area for clean surface.
344 views
Usually answered in minutes!
×