Have the various systems scanned and see if they show a fault code, I suspect they will. As far as the gauges go that sounds like the rebuilder screwed up.
SOURCE: Oil gauge on my instrument panel is not working on my 03 suburban
The bezel around the cluster is just cliped on. You will have to set the parking brake and put the gear selector in 1st gear and pry around the bezel to release the clips. The cluster is held in with 4 7mm screws.
SOURCE: digital instrument cluster
theres a fuse on the back side of these that will somtimes burn out to
SOURCE: 2000 Chrysler Voyager Instrument Cluster is dead
have you got a dimmer switch on your model to dim the dash lights. if you have it may be faulty. link the cables together if the lights work the switch is faulty. if you have not got a dimmer switch
your printed circuit on the back of the dash may be faulty or the plug in the back of the dash is not pushed all the way in. hope this helps
SOURCE: I have a 1997 Mercedes E320 and the instrument cluster guages
hello,good day,maybe your cluster nearly damage,send to your dealer,they have a testing procedure(simulation all the gauges), to determine if your cluster is defective,ty
SOURCE: 2002 chevy trailblazer. 1.oil pressure gauge
the sensor is on the side of the engine block. there's two thing that monitors oil. a pressure switch turns you oil light on and you oil pressure sensor the operates your gauge, start with your sensor. that is near you oil filter that is where it gets it pressure reading from
294 views
Usually answered in minutes!
×