The only way to be complete is to do it all manually. What kinds of problems are you having? I do have some manuals and expertise.
My problem initially was a failure in the electrical connection that served the fuel pump, an ilictrician installed a relay in slim black wire from the DME to the fuel pump. the car started but has never worked the same as before. No power. I just parked it and stareted a rebuild. I removed the seats door panels and disconnected some of the wiring in various locations. I would like to trace each electrical curcuit and repair or replace as necessary before I put in carpet and seats etc. I have an auto digital multimeter CDT-3200
I also have a 911 Manual but I dont understand the wiring diagrams. Is there a simple way to check each curcuit..
On these models, it is just following the diagram and then ohming out each wire to verify you have the right one. There is no "simple" way unfortunately. I would test the fuel pump pressure. This is extremely critical on these cars. To little, no power! What was the reason that he decided to repair it this way?
×
223 views
Usually answered in minutes!
×