SOURCE: Changing Serpentine Belt on '01 Impala LS (3.8L)
Can u turn the nut in the opposite direction that u have been trying? U need a lot of leverage to get enough tension off to remove the belt. If u have enough room, add a pipe to the end of your wrench, u will need a lot of room to move the tensioner enough. U might have better luck buying the wrench made for that purpose at a parts store. I think I paid about 25 a couple years ago, I couldn't fit a regular socket and wrench on the tensioner, it was a very tight space.
SOURCE: need to install a serpentine belt for a 1995 Chevy Cavalier..how?
There is a Large Pulley above the Tensioners Small Pulley. This Larger Pulley has a Bolt in the Middle of it. Geta Socket and Wratchet and Tork this Bolt and it will Lower the Tensioner so that you can Reinstall it.
SOURCE: tension pulley tightness problems
the easist way is to loosen the alternator and then pull and tighten it back up
SOURCE: 2005 chevy tahoe dies
you might have the alternator checked or simply replace it.. i would also replace the battery if its more than 2 years old
186 views
Usually answered in minutes!
×