What is the code is P1705 for my 1997 Lexus es 300

if you look at diagram below on top of tank it shows a line going to evap that would mean its located behind or next to fuel tank its a some what rounded canister about 8in long and 5 in wide .black plastic.

If check engine light goes off then there is a trouble code stored. You'll need to retrieve the code w/ a scan tool and follow the proper diagnosis.

Does a Lexus ES 300 camshaft position sensor WHAT???

If you are asking if a 1992 Lexus ES 300 is equipped with a camshaft position sensor, the answer to your question is NO. Otherwise, you need to clarify exactly what you are asking.

Battery was disconnected or replaced and activated the anti-theft system within the stereo. Usually the code is in the owners manual, call your lexus dealer if you are unable to locate the code!!

Go to the web site link below (copy and past the web address)

http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

There are 2 PDF documents to open from that page (above the picture).
The first (Routing guide) gives you the belt routing diagram code for your car (diagram 6-10).
The 1995 lexus ES 300, GS 300 and Sc300 all have the same engine and belt configuration so refer to the 1995 GS300.

The second PDF (Illustration) shows the belt diagram for code 6-10.

Hope this helps.
Cheers.

that is the security feature you must punch in the code to unlock it look in your owners manul for the code

Hello there here is a good site to give you more information and general idea of the cost involved Lexus ES Forum [Lexus Forum Archive] - Page 3 - Lexus Forums how to tell if it needs a tune up...? what is the value of my ... About how much does it cost to fix a '92 lexus ES300 with a ... 1997 Lexus ES 300 ...www.planetlexus.com/lexus-forums/archive/index.php/f-4-p-3.html - Cached

according to the manual i have... it has three.... one in the exhaust manifold.... and two in the exhaust pipe..... slightly vauge on the exact location of the last two sensors... but looks like it is after the catylitic converter.

Quite often that is to do with your Gear Position Neutral Safety switch.