SOURCE: chevy 5.7 17 bolt heads tork specs
Cylinder Head Bolt (Preferred Method) All Bolts First Pass in Sequence 22 ft.lb Long Bolt Final Pass in Sequence 75 deg. Medium Bolt Final Pass in Sequence 65 deg Short Bolt Final Pass in Sequence 55 deg. Cylinder Head Bolt (Optional On-Vehicle Strategy) First Pass in Sequence 26 ft.lb Second Pass in Sequence 44 ft.lb Final Pass in Sequence 66 ft.lb
SOURCE: 1995 chevy caprice classic
Try replacing your fuel pump relay, Its common on chevys.Those fuel pumps are too expensive to keep replacing
SOURCE: oil leak
Probably the housing for the filter? Have you tried tightening the bolts on the housing?
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: Replace front brake pads 2000 Chevrolet Blazer
yes remove one bolts where caliper bolts to the slide assembly older models had allen heads
64 views
Usually answered in minutes!
×