I need a Serpentine belt diagram for a 2008 Ford 5.4l engine

well it did not fall off
so pencil and paper draw out yours.
takes 5min work, no service manual to buy.
it depends on what 3 engines is there now.

seen here. (USA only car) exports ive no clue.

An auto parts supplier might have it.

Lots of images

https://www.google.com/search?q=Serpentine+belt+diagram+for+2008+Ford+Focus

..

The picture is for a zetec. Let me know if wrong diagram?

https://www.bing.com/videos/search?q=2008+ford+escape+for+a+serpentine+belt+4+cylinder&FORM=VIRE3#view=detail&mid=6733E930E1043CDC73D16733E930E1043CDC73D1

Have a look at this page here.
Can you help with this Ford 2006 Mustang question posted on FixYa

Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


Fig. Water pump drive belt routing-Ford 3.4L SHO engine
i wasnt sure what engine you had hope this helps good luck

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine