SOURCE: 2002 chevrolet avalanche abs light on
Hello, I see you are having abs problems. The electronic brake control module has shorted out internally keeping the anti lock brake motor running. You will want to take your vehicle to a certified dealer for this repair, because this module may or may not have to be programmed to your specific model. Please rate this answer, Thank you
SOURCE: 2002 Suburban 1500 - ABS Light On
No doubt the control module is out, and it continue to operate when the ignition key is off due to a circuit fault. You can disable it easily by pulling the 60 amp fuse in the under hood fuse box (it is listed on the panel as ABS). Note that this disables the ABS braking feature and traction control, so be very careful when driving. The part can be purchased on the GM global parts site, about $600-$700 for the module. This will be the second time this has gone out for me and GM is not sympathetic, rather "pathetic", for a part to fail so often.
SOURCE: 2008 Chevrolet Uplander. The car activates abs for
• An internal fault within the yaw rate sensor/lateral accelerometer, P/N 15189628, may be the first possible cause. • The vehicle stability enhancement system (VSES) electronic brake traction control module See if this info helps
SOURCE: my 2000 siverado shows abs code C0265 brake
The electronic brake control module will need to be replaced. The realy is inside the module and there is no replacement or repair for the module itself.
136 views
Usually answered in minutes!
×