1995 Ford F350 Logo

Related Topics:

Posted on Oct 02, 2010
Be the first to answer

I HAVEFOUND TWO FIRING ORDERS FOR THIS ENGIN BOTH OF WHICH ARE SO FAR OFF THAT I AM SURE THE ENGIN WOULD NOT START. IT RUNS BUT HAS A MISS, I I CHANGED THE WIRES AND THINK THAT I MAY HAVE CROSSED A WIRE BUT NOT SIX CANT FIND THE ORDER ON THE MANIFOLD IS THEIR ANOTHER PLOACE TO LOOK. HOW MANY ORDERS ARE THERE THANKS

Answer This Question

5 Related Answers

Anonymous

  • 373 Answers
  • Posted on Oct 07, 2008

SOURCE: firing order

Hi...
This is the firing order for your 99 F150 4.6L..

f62b9a3.jpg The firs one is 1 6
5 3

Second one is 4 7
8 2

Ok. I hope this help on your problem.
Thank you for use fixya....

Ad

Anonymous

  • 294 Answers
  • Posted on Mar 22, 2009

SOURCE: firing order

that is true your firing order is wrong here is a link to a web sight that has all the 1998 explorers 6cyl just click on the one that your explorer is and it'll show you the correct firing order also make sure you have your plugs gaped right good luck.
http://autorepair.about.com/library/firing_orders/bl-ford-firing-98.htm

Molson02536

Harvey N Tawatao

  • 3854 Answers
  • Posted on Jul 03, 2009

SOURCE: Spark Plug Wire Sequence

Your firing order is 1-5-3-6-2-4 and your #1 is the cap terminal the 3 O'clock from the front so that would be the one towards the driver's fender and the rotor rotates clock wise. So the next post would go to the #5 cylinder. Hope this helps friend. Keep me posted, be glad to help you get your truck running 100%.

c17hydro

Greg Bernett

  • 2993 Answers
  • Posted on Aug 28, 2009

SOURCE: diagram of the firing order 95 t-bird

1995 Ford Thunderbird
3.8 liter V-6

1069ac8.gif
1995 Ford Thunderbird
3.8 liter SC V-6

23ea1d2.gif
1995 Ford Thunderbird
4.6 liter SOHC V-8

56e90e1.gif

Anonymous

  • 834 Answers
  • Posted on Jun 05, 2010

SOURCE: Firing order diagram

Here is the firing order diagram for that vehicle, and if the ignition wires are not crossed then one of the spark plugs might have been damaged while installing it and the spark plug gap closed on one of the spark plugs, or one of the ignition wires (spark plug wires) has been damaged, and if those wires are over 5 years old then you should replace them. I hope that this helps you to solve your problem.


68450ee.gif

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

96 E250 300 ci Was running perfect then started missing Replaced vacuumed hoses, found 1 loose spark plug, and 3 that were finger tight. Replaced all 6 plugs.
If your 96 E250 300ci was running perfectly and then started missing and the code is indicating a miss fire in cylinders 1 and 2, there could be a few potential causes. Here are a few steps you can try to troubleshoot and resolve the issue:
  1. Check the ignition system: Make sure that the ignition system is functioning properly. Check the distributor cap, rotor, spark plug wires, and ignition coil for any signs of wear or damage.
  2. Check the fuel system: Make sure that the fuel system is functioning properly. Check the fuel filter, fuel pressure, and fuel injectors for any signs of wear or damage.
  3. Check the compression: A compression test can help to determine if the engine is getting enough compression to run properly. Low compression in cylinders 1 and 2 can cause the engine to miss fire.
  4. Check the vacuum lines: Make sure that the vacuum lines are properly connected and not leaking. Any vacuum leaks can cause the engine to run poorly and miss fire.
  5. Check the PCV valve: The PCV (positive crankcase ventilation) valve can become clogged or malfunctioning and cause the engine to run poorly and miss fire.
  6. Check the EGR valve: The EGR (exhaust gas recirculation) valve can become clogged or malfunctioning and cause the engine to run poorly and miss fire.
  7. Check the Engine Control Module: The Engine Control Module (ECM) controls the ignition and fuel systems and if it's malfunctioning it can cause the engine to miss fire.
It's important to note that some of these steps may require special tools and knowledge of the vehicle's engine system, so it's best to take it to a professional mechanic to avoid causing more damage.
Read full answer
Jan 19, 2023 • Cars & Trucks
0helpful
2answers

Did tune up firing order right engine turns over getting fuel but wont start
Do you have any engine codes present ? Are you sure your firing order sequence is correct ?

Have you checked for spark at the spark plugs ?
Read full answer
Nov 20, 2016 • Cars & Trucks
2helpful
2answers

Firing ORDER FOR THE 2006 chevy Uplander Van 6 cyl? Replaced spark plug wires and it now has 'miss'
There are 2 6 cylinder engines for that year. Both are the same as far as wiring/firing order but gave you both anyway(see below). There have been times that I thought I did the same thing as far as the firing order and have been doing it for 25+ years. Sometime i did and sometimes I didn't. So if you find the wiring is correct and you seem to have a miss, In about 90 percent of the time that this has happened to me I had knock a vacuum hose off so you might want to start there if they are right. It sure sounded like a miss at those times but was vacuum. There are other factors but that's where I would start if this is the case. I hope this helps and good luck.


clifford224_202.jpgclifford224_203.jpg
Read full answer
Apr 30, 2011 • 2006 Chevrolet Uplander
1helpful
2answers

Changed plugs on a 1999 f-150 engine now I have a engine miss
check you dont have a broken lead removing them one at a time with engine running will show you which cyl is not firing check plug wasnt cracked when being fitted change lead double check firing order if the engine didnt miss before the plugs were changed then this course of action should fix the miss its easy to cracl spark plugs when fitting if the plug socket does not have rubber insert carbon leads only need to be pulled to hard or bent to far to damage the carbon fibers that run through them check that you dont have two leads crossed this is a common mistake with v8sand is easy to do
Read full answer
Apr 06, 2011 • 1999 Ford F150 Regular Cab
6helpful
3answers

My son has a 1996 Volvo 850 GLT Wagon and he needs the spark plug diagram. He changed the plugs, rotor, and distributor cap and the vehicle will not start. He did this work because the engine was running,...
Don't know your engine size so pick the correct one for your motor:


0ac2a3e.gif
2.3L 4-Cylinder Engines Firing Order: 1–3–4–2 Distributor Rotation: Clockwise


d674eac.gif
2.8L 6-Cylinder Engine Firing Order: 1–6–3–5–2–4 Distributor Rotation: Clockwise


6e9df21.gif
2.9L 6-Cylinder Engines Firing Order: 1–5–3–6–2–4 Distributorless Ignition


91ee348.gif
2.3L and 2.4L 5-Cylinder Engines Firing Order: 1–2–4–5–3 Distributor Rotation: Counterclockwise
Read full answer
Oct 12, 2009 • 1996 Volvo 850
0helpful
1answer

Runs rich and miss fires
Make sure the spark plug wires are on right (propper firing order), and check the TPS sensor. Are there any exhaust leaks or vacuum leaks? Did you use the original intake manifolds and Holley throttle body? If not you need to replace the PROM chip with the one from the donor car.
Read full answer
Sep 20, 2009 • 1986 Pontiac Fiero
0helpful
1answer

1993 Jaguar- gave a tune up now won't start.... was making a sluggish engine sound.-- a clunk missing noise?????? AHHHH
sounds like u have the firing order goofed up, call the parts store and ask them for the firing order and then go back and make sure the wires are in the right spots, u cant put them wires on any plug, as there is a firing order for every vehicle.....if u dont itll sound like **** and run like **** if itll run at all...
Read full answer
Jul 10, 2009 • 2003 Jaguar X-Type
2helpful
2answers

My 96 Saturn sc2 wont turn over or start.
Was there oil/coolant in cylinders when they were pulled?
Read full answer
Jun 22, 2009 • 1992 Saturn SL2
0helpful
1answer

95 ford mustang that was running but was miss firing now doesn't.
Did you check the timing
Read full answer
May 16, 2009 • 1995 Ford Mustang
0helpful
1answer

RUNNING RICH AND MISSES,IT SMOKES BLACK
check your spark plug wires to make sure they are in the correct firing order, thats what it seems like the problem is
Read full answer
Apr 18, 2009 • 1993 Toyota Pickup
Not finding what you are looking for?

View Most Popular

1995 F350

  • Cars & Trucks

Related Question

96 E250 300 ci Was running perfect then started missing Replaced vacuumed hoses, found 1 loose spark plug, and 3 that were finger tight. Replaced all 6 plugs.

  • Cars & Trucks

Related Topics

179 views

Ask a Question

Usually answered in minutes!

Popular Questions

What is a tbc fault on a 2006 ford f350 6.0

2006 Ford F 350 Super Duty

I HAVE A FORD F350 V10 [GAS] THAT WILL SHUT DOWN

1999 Ford F350 Regular Cab

2004 f350 power steering problem.

Ford F-350 Cars & Trucks

Looking for a wiring diagram

1994 Ford F350 Crew Cab

I have a 95 Ford F350 with the 460 motor. It started running fine when cold but after it warms up it starts to run rough, lose power, and runs REAL rich. I'm only getting a little more than 2mpg.

1995 Ford F350

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...