There are 3 DTC codes related to the TPS....
1. P0121 - Throttle Position (TP) Sensor Performance
2. P0122 - Throttle Position (TP) Sensor Circuit Low Voltage
3. P0123 - Throttle Position (TP) Sensor Circuit High Voltage
If there is any further assistance, please let us know
Testimonial: "very goooooooooooooooooooooooooood "
thanks for these information, but as I understand that there is only ONE TPS which is located close to the IC and Map Sensor, and it has only one code. Is that correct? please advise.
You are correct, ther is only one TPS, but it can fail in 3 different ways,........, that is registered by the ECU......too high a voltage, too low a voltage or fluctuating signal, it should be a smooth hill looking curve as you accelerate and back down again as you decelerate, but if it is up/down/up/down as you accelerate, it is dropping out, or not making good earth.......
×
Have a problem in map sensor for epica
940 views
Usually answered in minutes!
×