At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How to replace1989 cadillac sedan deville fuel pump
TO replace the fuel pump, remove the gas tank. When replacing the fuel pump also replace the strainer on the bottom of the pump and replace the fuel filter.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, The fuel pump is inside the gas tank. Remove the exhaust, Disconnect and remove all hoses and lines, also disconnect all electrical wires, remove 4 bolts from straps holding tank. Drop tank down. Remove lines and hoses from top of fuel pump module, remove lock ring, pull fuel pump module, turn unit as necessary so you don't destroy the fuel level sender. Hope this helps
The fuel pump is located in the fuel tank. On these GM cars, the fuel tank must be dropped in order to change the pump. It is alos recomended that the fuel filter be changed at the same time which is on the frame of the vehicle, left side. the pump at autozone runs about $75 and don't forget the strainer for about $10. The filter runs about$10 also.
you need to figure out if your missing spark at the plgs,or check fuel pressure at fuel rail,you'll need at least 55psi of fuel pressure,but if you have had no luck spraying the throttle body,your probably missing spark
the fuel pump is inside the tank. did the distributor cap get wet when you were installing the thermostat? check to see if the wires are pluged into the distributor cap well. if you use a fuel pressure gage you will be able to determine if the fuel pump is working.
×