Accelerator Pedal Position Error.
P2138 - Accelerator Pedal Position Sensor Circuit Range / Performance Problem
Clear the code - if it recurs, change the sensor.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
If i may....
1 Thumb ratings are reserved for answers that are abusive, threatening, etc.
What about my answer is any of that?
You got the exact diagnosis you were looking for... did you have a follow-up question?
Do you need absolute PROOF the DTC is what I have listed it as?
Please re-consider your rating - as most experts here answer free questions, and our rating is our only source of satisfaction for doing so. 1 Thumb rating tend to sting a bit - especially with no explanation.
Thanks!!
That explanation is pretty spot on from what I've been able to find searching the internet for several hours.
×
NISSAN OBDII DTC P1105 Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Circuit P1110 Intake Valve Timing Control Circuit (Bank 1) P1120 Secondary Throttle Position Sensor Circuit P1125 Tandem Throttle Position Sensor Circuit P1132 Intake Valve Timing Control Position Sensor (Bank 1) P1135 Intake Valve Timing Control Circuit (Bank 2) P1137 Intake Valve Timing Control Position Sensor (Bank 2) P1140 Intake Valve Timing Control Position Sensor (Bank 1) P1145 Intake Valve Timing Control Position Sensor (Bank 2) P1148 Closed Loop Fault Detected (Bank 1) P1168 Closed Loop Fault Detected (Bank 2) P1210 Traction Control System Signal Fault P1220 Fuel Pump Control Module Fault P1320 Ignition Control Signal Fault P1335 Crankshaft Position Sensor Circuit P1336 Crankshaft Position Sensor circuit P1400 EGR/EVAP Control Solenoid Circuit P1401 EGR Temperature Sensor Circuit P1402 EGR System Fault Detected P1440 EVAP Canister System Leak Detected P1441 EVAP Vacuum Cut Valve Bypass Valve Circuit P1443 EVAP Canister Control Vacuum Switch Circuit P1444 EVAP Canister Purge Volume Control Valve Circuit P1445 EVAP Purge Volume Control Valve P1446 EVAP Canister Vent Valve Circuit P1447 EVAP Canister Purge Flow/Volume Control Valve Circuit P1448 EVAP Vent Control Valve Circuit P1490 EVAP Vent Control Valve/Bypass Valve Circuit P1491 EVAP Vacuum Cut Valve/Bypass Valve Circuit P1492 EVAP Canister Purge Control Valve/Solenoid Valve P1605 Transmission Control Module A/T Diagnosis Communication Line Fault P1705 Throttle Position Switch Circuit P1706 Park Neutral Position Switch Circuit P1760 Overrun Clutch Solenoid Valve Circuit
P1900 Cooling Fan Control Circuit
SOURCE: service engine soon light P1152 code
Most likely a one of the o2 sensors are causing this problem. What you need to do is a get a repair manual and do some pin tests on the O2's and figure out which one is faulty.
3,067 views
Usually answered in minutes!
×