How do I replace my owners handbook. 2007 sonata

try google images for a picture of the fuse box, try ebay for an owners handbook which you may need in the future?

You can download a handbook for free on this site.

www.citroendriveeeurope.com.au/wp-content/uploads/2013/10/Citroen-Berlingo-Owners-Handbook.pdf

Check owners manual. There maybe options for shutting off and turning on the beep using the remote. A sequence of button pushes on the remote for Honda as well.

Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc

The fuse must be in the main fuse box. The position of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To help with your search, the head light fuses should be between about 10 amps each if you have separate fuses for each light..

Download in this link 2007 Ford Fusion - Owners Manual

Hope helps (remember rated and comment this).

Theres is not much to do as far as replacing parts.
The owners manual that came with the vehicle will have a service interval for maintenance. Spark plugs, Fuel filter and air filter are good places to start. Also transmission fluid change and tire rotation. Of course this all depends on the mileage the vehicle has.

answer from the uk.you will only have a problem showing up if the engine management system records a fault within that system, so, the only solution is, if you have remote locking,change the batteries and use to unlock car not using the key.or if no remotes,change keys on a regular basis.(they are coded to the car) do not use grey (service key) only 2 x black keys supplied with car....check handbook re keys....

It's in your owner's manual - plus!, THERE'S A 1-800 number to folks to HELP you PROGRAM your GARAGE DOOR opener.... amazing the number of people who don't read.

there is an adjustment screw on the back of the headlamp assembly. check the bulb and make that is installed straight with the metal tab lined up inside the hole.