I need to know how to remove a starter from a 1999 Nissan Altima?
the bolts should be on the drivers side.
you will have to crawl underneath the car to do this task
SOURCE: How do you remove a 1999 Nissan Altima starter?
Nissan Car Altima & Sentra 1999-06
StarterRemoval & Installation
Negative battery cable
Air duct
Harness protector from the harness
Starter wiring at the starter
Starter-to-engine bolts
Starter from the vehicle
Fig. Starter location and mounting detail-3.0L Maxima with a
manual transaxle
Fig. Starter location and mounting detail-3.5L Maxima
To install:
Starter and torque the long bolt to 57-72 ft. lbs. (77-98 Nm) on
Altima and Maxima and 41 ft. lbs. (55 Nm) on 350 Z. torque the short
bolt to 22-30 ft. lbs. (30-41 Nm)
Starter wiring
Harness protector
Air duct
Negative battery cable
Negative battery cable
Air inlet tube
Harness bracket
Wiring at the starter
Starter
To install:
Starter and torque the bolts to 60 inch lbs. (7 Nm)
Starter electrical connectors
Harness bracket
Air inlet tube
Negative battery cable
1.6L & 2.0L Engines
To install:
Negative battery cable
Wiring at the starter
Bolts attaching the starter to the engine
Starter
Starter and torque the bolts to 70 inch lbs. (8 Nm)
Starter electrical connections
Negaative battery cable
1.6L, 1.8L & 2.0L Engines
To install:
Negative battery cable
Wiring at the starter
Bolts attaching the starter to the engine
Starter
Starter and torque the bolts to 70 inch lbs. (8 Nm)
Starter electrical connections
Negative battery cable
1.8L & 2.0L Engines
To install:
Negative battery cable
Wiring at the starter
Bolts attaching the starter to the engine
Starter
Starter and torque the bolts to 70 inch lbs. (8 Nm)
Starter electrical connections
Negative battery cable
2.4L & 2.5L Engines
To install:
Negative battery cable
Air inlet tube
Harness bracket
Wiring at the starter
Starter
Starter and torque the bolts to 60 inch lbs. (7 Nm)
Starter electrical connectors
Harness bracket
Air inlet tube
Negative battery cable
2.4L Engine
To install:
Negative battery cable
Air inlet tube
Harness bracket
Wiring at the starter
Starter
Starter and torque the bolts to 60 inch lbs. (7 Nm)
Starter electrical connectors
Harness bracket
Air inlet tube
Negative battery cable
2.5L Engine
To install:
Negative battery cable
Air cleaner cover and duct
Harness bracket
Wiring at the starter
Starter
Starter and torque the bolts to 60 inch lbs. (7 Nm)
Starter electrical connectors
Harness bracket
Air inlet tube
Negative battery cable
3.5L Engines
Negative battery cable
Air cleaner case (upper) and air cleaner to electric throttle
control actuator tube.
Harness protector from the harness
Starter wiring at the starter
Starter-to-engine bolts
Starter from the vehicle
Fig. Starter location and mounting detail-3.5L engine
continue...
2,121 views
Usually answered in minutes!
The car wont start and its not the starter
where is it?
window goes down but does not go up.
×