Here ya go...found the block for the reply.... 3.8L engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System
Testimonial: "thank you. i will try this."
The fireing order helped get the car running.but it still won't rev past 2500 rpm .What else could cause it to stop going past 2500 rpm?
Could be a couple of things but Make sure you go through the spark plugs again and the coil....this problem is usually a firing order issue. But, it also could be a bad coil.
I had trouble with the heat sleeves being so brittle I had to cut them off and tape them
back on. In the process I crossed two wires. It is never good to have a backfire when
you first start up with new plugs and wires. Turns out 2
×
FIRING ORDERS
NOTE: To avoid confusion, removal and tag the wires one at a time, for replacement.
Fig. 1: 2.2L engine Firing order: 1–3–4–2 Distributorless Ignition System
Fig. 2: 2.3L engine Firing order: 1–4–4–2 Distributorless Ignition System
Fig. 3: 2.5L engine Firing order: 1–3–4how do Iknow fireing order on ignition - 88002g52.giforless Ignition System
Fig. 4: 2.8L, 3.1Lhow do Iknow fireing order on ignition - 88002g53.gifgines Firing order: 1–2–3–4–5–6 Distributorless Ignition System
Fig. 5: 3.8L engine Firing order: 1–2–3–4–5–6 Distributorless Ignition System
2,808 views
Usually answered in minutes!
What size of motor do you have?
3.8
could this be bad coils?
the diagram supplied is only a spark plug wiring diagram from the coil pack to the spark plugs. The ignition system firing order for the spark plugs is 1-6-5-4-3-2
×