SOURCE: headgasket is out of this 1997 saturn sc2 1.9 liter
I have changed a head gasket on a saturn 1.9 L engine, no special tools are required. Take your time and be patient. do not over tighten the headbolts and do not forget to torque them to the correct specs. after about a week of driving check everything you tightened to uinsure they remained tight. all should be well when the project is complete. Oh one more thing. a mechanic dropped a socket into a friends engine and blew the motor. be very careful that all of your tools are acounted for before starting the engine
SOURCE: 2001 saturn sc2 gets code 341&340 camshaft sensor
if you have high resistance in secondary ign. system (plug wires, ign.coil) this will cause this code to set. make sure you are using a high quality spark plug wire set. not from autozone!!! and denso non platinum tipped spark plugs. also use a diaelectric grease on plug wires to keep moisture out.
SOURCE: how do i replace a ignition switch in a saturn sc2
Takes hammer and small long chisle or puch to back out two screws that have heads sheered.This removes assembly then has two 5.5mm screws retaining switch to housing.
SOURCE: 1997 Saturn SC2 Coupe automatic has no reverse??
If the transmission is not hurt, it may just be a simple fix by replacing the reverse solenoid. The bad news is that it's in the valve body in the transmission, if there is an Auto Zone around your area, have them scan the cart for any DTC codes and hope that there is a code in the history that relates to the transmission issue. Auto Zone scan free of charge and if there is a transmission code, that would help address the transmission issue and if it's just a reverse solenoid. That's good news, since it cost just a little more then a transmission oil and filter change. Good luck and hope this helps. Keep me posted, be glad to help you get your car running 100% again soon.
55 views
Usually answered in minutes!
×