Cars & Trucks Logo
Anonymous Posted on May 14, 2008

MAZDASPEED6 problems Thinking of buying a MAZDASPEED6, can anyine tell me abour it's problems

4 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Dec 05, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 05, 2008
Answers
1
Questions
0
Helped
4264
Points
8

Hmmmm lets see......while driving on the highway 80 to 85 mph in 6th gear I am just under 3000 rpms. do you even own a speed 6? *****? crappy AWD ? have you ever driving the car hard? really hard like my **** in ur ****? this is one of the best handling cars ive ever drivin in...... three 300 zx's- 1 TT...... turbo 240sx (ka24det)........grow the *******......

The only thing i agree on is the gas consumption (stock) is very bad...... after installing a cold air intake alone my gas mileage was much better ...and now i have test pipe and down pipe plus HKS ssq bov and my car sucks gas like a 1.6 liter honda civic.

try taking a turn like a man you ***** maybe your opinion would change

  • Anonymous Dec 05, 2008

    one last thing for that **** ....nissan skyline BNR32 and BNR33 both are "on demand" AWD just like the speed6. only difference is the r32 and r33 are rear wheel drive 100% under normal driving and ONLY 50/50 when AWD kicks in.....would you say nissans r32 and r33 skylines have a CRAPPY AWD system for this reason when those cars are legends and still out perform many cars out today? learn what your talking about before talking you dumb **** b i t c h

×

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 7 Answers
  • Posted on Nov 30, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Nov 30, 2008
Answers
7
Questions
0
Helped
6868
Points
11

Look for blue smoke from exhaust, generally indicating internal turbo oils seals leaking and gear oil leaks from xfer case

Ad

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 1,010 Answers
  • Posted on May 14, 2008
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: May 14, 2008
Answers
1010
Questions
6
Helped
630495
Points
2385

THE BIG PROBLEM with the Mazdaspeed6 - poor gearing, lousy gas mileage and a crappy AWD system. The gearing means you have to shift to 3rd just to reach 60. The car has no cruising gear so you're running 4k rpm at 85-90 (I can get over 30 mpg running all day in my 330i 6 speed at 95+ mph). and the stupid awd system can only shift 50% of the power to the rear wheels while most of the time power goes to the front! That's just plain stupid!

Anonymous

Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

  • Contributor 6 Answers
  • Posted on Jan 23, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

Joined: Jan 23, 2009
Answers
6
Questions
0
Helped
6373
Points
11

I just think that your Mazda is just broken due to your driving

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have honda civic 1995 can anyine tell me that 15 inch rim would be suitable for the car as my country has not good roads.would 15 inch rims would damage suspension or not?

talk with a tyre dealer on this one as there are road regulations that you will have to comply with. 15 " wheels will fit your car but you will have to select a lower profile tyre to comply with regulations so you would be achieving any thing as to clearance. Discuss the matter with an "off road" shop as to suitable suspension modifications to get what you want
0helpful
1answer

1998 Ford Taurus Lights will not go off at all unless battery is disconnected and the car wont start Key in ignition does nothing and lights just stay on Anyine know whats going on Is there ANY WAY to...

In this case, you most problemly have a brake light switch under the dash attached to the brake pedal mechanism. The rubber stop gromite maybe worn out. switch is open all the time. Also the clutch pedal maybe also have a damaged switch. You can make rubber pad with rubber floor matting or stick on picture frame wall hanging stick pads. Otherwise when you started & on the road again go to car parts centre & buy the correct parts for long term replacement. okay,
0helpful
1answer

When driving at a steady 35 to 40 mph, the engine rpm's instantly drop abour 20 to 30 rpm's What will cause this??

when was the last tune up or fuel filter chage and oil change done..if you cant remember, its time..repost please...
1helpful
1answer

Engine service light

u can try. Disconect th batery cables wait 5 min. And reconected again. If that does not errased your codes, there may be something u need to fix in th car. If u all ready fixit, u will need to erase it whit a code reader. A mecanic will charge u aroun $50 or u can buy th reader for abour th same amount.
0helpful
1answer

After driving my MazdaSpeed6 and I let it sit and idle or if I am at a red light, it starts pouring white smoke out of the exhaust. I take it to the dealership and they tell me nothing is wrong with it. ...

I think you should go for manual first after that it would be easy for you to solve your problem. I had visited this site past 2 months before for my vehicle and find it quite helpful may be you will also get something useful here
Best Manuals
0helpful
1answer

Mazdaspeed6 timing diagram

pls send your complete email and the model /year of the vehicle. included the VIN number, then ill send diagram to your email
0helpful
1answer

Cannot find a maintenance manual any where for a 2006 Madza 3. I need to know where the spark plugs are at

For Mazda Car 2005-06 Spark Plugs...

Inspection
Inspect the electrodes and ceramic insulator.Burned or worn electrodes may be caused by:

Advanced ignition timing Loose spark plug Plug heat range too hot Insufficient cooling
Fouled plug may be caused by:
Retarded ignition timing Oil in combustion chamber Incorrect spark plug gap
Plug heat range too cold Excessive idling/low speed running Clogged air cleaner element Deteriorated ignition coils
Do not adjust the gap of platinum tip plugs; replace the spark plug if the gap is out of specification. The gap should be 0.049-0.053 in. on all models except Mazdaspeed6 or 0.028-0.031 on Mazdaspeed6 models.
  1. Replace the plug at the specified interval or if the center electrode is rounded.
  2. Apply a small quantity of anti-seize compound to the plug threads, and screw the plugs into the cylinder head finger-tight.
Removal & Installation
  1. Before servicing the vehicle, refer to the precautions section.
  2. Remove the battery cover.
  3. Disconnect the negative battery cable.
  4. Remove the plug hole plate by lifting off and removing the plug hole plate from the installation areas (rubber and clips) as shown in the illustration.
  5. Remove the front suspension tower bar (joint).
  6. Remove the ignition coils.
  7. Remove the spark plugs.

To install:
  1. Installation is the reverse of removal, tighten the plugs to 8-10 ft. lbs. (10-14 Nm).
2.3L (L3) Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Disconnect the negative battery cable.
  3. Remove the ignition coils.
  4. Remove the spark plugs.

To install:
  1. Installation is the reverse of removal, tighten the plugs to 8-10 ft. lbs. (10-14 Nm).

Mazdaspeed6
  1. Before servicing the vehicle, refer to the precautions section.
  2. Disconnect the negative battery cable.
  3. If equipped with a turbocharger, remove the charge air cooler.
  4. Remove the ignition coils.
  5. Remove the spark plugs.

To install:
  1. Installation is the reverse of removal, tighten the plugs to 79-177 inch lbs. (9-20 Nm).

Good luck(remember rated and comment this help).
0helpful
1answer

When i start up my truck it will rev up really high and die some times and at an idle it will start reving up to abour 1500 rpms what could the problem be? It has the 6.5 diesel in it

sounds like a vacuum leak buy a can of carb cleaner start the motor spray carb cleaner if u find a place that kills the engine thats usually the leak if thats not it check the throttle position sensor. good luck
0helpful
1answer

Mazdaspeed6 work shop manuel

http://www.ugnius.lt/mazda/
Not finding what you are looking for?

4,274 views

Ask a Question

Usually answered in minutes!

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...