A common issue are the boards that the tailights and brake light bulbs plug into But you may want to check and make sure that all your other parking lights come on just to make sure a fuse didn't blow on you. Before doing anything else with the boards check those particular bulbs out to make sure didn't burn out on you.
SOURCE: left blinker light stays on solid when headlights are on
I have had this happen and it is rare, but I have had a filiment burn out in a two filment buld and short to the other filiment. It does happen and I think this might be your problem, the only way to find it is a visual inspection of each bulb. I am sure many people will think this is crazy, but I have had the exact same problem, I had the schematics, tested the circuits,etc. and them by accident found a stop/blinker 1157 bulb that had done this exact thing. I hope this helps you, check the bulbs in your headlights also.
SOURCE: left rear tail lights/ blinker will not come on
Blinker too fast, the same side blinker light bulb on the front (or back) is burned. Check the fuses for the rear lights. You might have a light bulb filament stuck.
SOURCE: Brake lights and Tail lights not working.
you might need to get new wiring done to the lights because there either riped or old
SOURCE: I don't have tail lights blinker very dim and
You either have a short in that part of the electrical or a bad ground..
SOURCE: NO LEFT SIDE TAIL ,STOP OR BLINKER REAR LEFTLIGHT
did you try to replace the bulb in the back normally when it blinks fast like that its just the bulb and its doulbe film thats why the brake and blinker dont work
187 views
Usually answered in minutes!
×