Isuzu serpentine belt routing diagram for 6VE1, 6VD1, Rodeo, Trooper and Axiom V6

Here is the serpentine belt routing for a 2013 VW CC with a V6 3.6 liter engine:

1. Start by locating the automatic belt tensioner on the front of the engine.
2. Route the belt around the crankshaft pulley at the bottom of the engine.
3. From there, route the belt around the idler pulley, which is just above the crankshaft pulley.
4. Next, route the belt around the alternator pulley, which is located on the top left side of the engine.
5. After the alternator, route the belt around the power steering pump pulley, which is located on the top right side of the engine.
6. From there, route the belt around the water pump pulley, which is located just above the power steering pump.
7. Finally, route the belt around the tensioner pulley, which should be the last pulley in the belt routing.

Double-check that the belt is properly seated on each pulley and that the routing matches the diagram on the engine or in the owner's manual before starting the engine.

Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Remove the upper radiator shroud. Remove the fan by undoing the 4 bolts that hold it to the water pump. Using a wrench turn the tensioner pulley hex nut to release tension on the belt. Remove the belt and replace with a new one. Refer to diagram for routing detail. http://www.fixya.com/support/r5914885-isuzu_serpentine_belt_routing_diagram

Click on the following: free, direct Link. It has several Diagrams including the Serpentine and Drive Belt Diagram for your 1999 Isuzu Rodeo 3.2L DOHC V6 Engine with Engine Options (AC/No AC etc.). It also has Instructional and Directional Diagrams that will help you.

http://www.2carpros.com/car_repair_information/year/1999/make/isuzu/model/rodeo/1999_isuzu_rodeo_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

On all vehicles since 1984 the v-belt/serpentine belt routing diagram has been on the inside of the hood or on the radiator cross member.