I have a 2008 Ford Fusion and the passenger side head lamp will not come on. The fog lights and driver side head lamp works but the passenger side will not work on bright or on dim, what could this be?

Replace Your Car Passenger Side Mirror - How To - DIY ...

? 3:46
https://www.youtube.com/watch?v=77lBQ_CRqdo
Apr 10, 2012 - Uploaded by GregHint
See how even a novice can repair a passenger mirror on a FordEscape. ... Replace Your Car Passenger Side Mirror - How To - DIY .... Replace 2003-2008 Toyota Corolla Side Mirror, How to Change Install 2004 2005 2006
About 22,000 results (0.61 seconds) Search ResultsHow-To: Replace Ford Fusion side mirror (HD) - YouTube? 7:27https://www.youtube.com/watch?v=iGHeXUbvvJsMay 7, 2014 - Uploaded by Derrick HardingFord Fusion SEL 3.0 Liter V6 How to fix broken side mirrorIncludes: ... Published on May 7, 2014 ..... Great instructions - just replaced the driver's side mirror on my 2007 Fusion following your instructions. ... Front brake pad replacement 2006 - 2012 Ford Fusion Lincoln Mazda Pads Rotor Install Remove ...

New car day running light is achive only by ecm programming

Ask the dealer

You have to remove the mud guards inside the fender wells. Also for the passenger side headlight.

Check your instructions with the fog lamps, I believe you will need to take your car to a dealer to have them activate the fog lamp driver in the Totally Integrated Power Module.

Look for a relay in the realy box under the hood. It sounds like the relay is failing.

There is a splash shield in the right side wheel well. If you take out the screw you can get the access cover off to get to the headlight. It is labeled bulb access.

Check the bulb, socket interface, clean contact points. IF you have a test light or ohmeter, check for power to the socket. If unpowered, check the fuse, if powered check bulb element, and socket condition.

Sounds like similar problem I had on my older 93 - one side main beam and brake light not working. Turned out to be a problem with the filament testing relay. Got it resoldered and now ok.

hi from uk the fog lghts? i assume front fog lamps ? the head lights have to be on dipped beam then the fogs will also work but in uk this is so as to prevent fogs only being used (blinding oncoming traffic ) if weather conditions req fogs to be used for poor visibility ? then the side/tail and h/lights must also be on like wise the rear fog light/s operate the same way hope this helps and makes perfect sense ?? all above is assuming bulbs have been checked and fuse/relay and power to each lamp ?