Remove the trim thats around the window, run piano string between the body and the glass (wear gloves) that helps break the bond of the adhesive. Go to your local parts to get new adhesive, and your local junk yard should have glass (go to a yard that pulls the part for you, they cost about $80.00 used). I am not to sure how to do the hook-up for the defroster. Email at [email protected] and I'll go into more details.
?€¢
Liftgate module (LGM)/endgate module (EGM)
?€¢
Rear window defogger grid
Rear Window Defogger Operation (With LGM)
Battery positive voltage is supplied through the LGM 2 fuse to the LGM for the rear window defogger system. When the rear window defogger switch is depressed, the HVAC control module illuminates the rear window defogger indicator, and sends a class 2 message to the LGM to enable the rear window defogger. The LGM enables the rear window defogger by allowing battery positive voltage to the rear window defogger.
When the rear window defogger switch is pressed for the first time, the defogger cycle lasts 10 minutes. Further operation results in 10 minute defogger cycles.
DTC B0283 Electric Rear Defrost Circuit - do you know what DTC'S - diagnostic trouble code's are ?
Circuit Description
The liftgate module (LGM)/endgate module (EGM) monitors the voltage level on the supply voltage circuit of the rear window defogger. The LGM/EGM test the supply voltage circuit of the rear window defogger every 160 milliseconds. With the rear window defogger inactive, the supply voltage circuit of the rear window defogger will have no voltage present. With the rear window defogger active, the supply voltage circuit of the rear window defogger will be near system voltage.
90 views
Usually answered in minutes!
×