How do you change a serpentine belt on a 2007 forenza suzuki

Raise vehicle, support with safety latches/jackstands, remove splash guard from passenger front wheel well. Using a box-end 15mm wrench release tension from automatic tensioner. Noting belt routing, remove serpentine belt, replace with new one, reinstall splash guard.

Dec 30, 2009 • 2007 Suzuki Forenza Sedan

10helpful

1answer

Need diagram for serpentine belt

2004 SUZUKI FORENZA - L4 2.0L 2000cc GAS FI N

Adjustment
The belt is automatically adjusted by the auto tensioner.

Drive Belt Routings

Fig. Accessory drive belt routing-2.0L engine

Removal & Installation

Remove the air filter housing assembly bolts and the air intake tube.
Remove the air filter housing assembly from the vehicle.
Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
Remove the serpentine accessory drive belt.

To install:

Use a wrench to turn the tensioner bolt clockwise, compressing the tensioner, and releasing the tension on the serpentine accessory drive belt.
With the wrench in place on the tensioner bolt, loop the serpentine accessory drive belt loosely over the pulleys.
Slip the belt over the tensioner.
Remove the wrench from the tensioner bolt and the belt will tighten itself.
Install the air filter housing assembly into the vehicle.
Install the air intake tube and the air filter housing assembly bolts.
Tighten the air filter housing assembly bolts to 53 inch lbs. and nm

I really hope helped with this. remember rated this help. Good luck.

Nov 12, 2009 • 2004 Suzuki Forenza

0helpful

1answer

My valve cover is leaking. Do I need any special tools to replace it? Also, the serpentine belt needs replacing. Anything special about that? 2006 suzuki forenza. Thanks.

ANSWERS to Both is NO if you have Minimal Skills you can Do it Yourself

Nov 07, 2009 • 2006 Suzuki Forenza

Question 2

Anonymous

Master 2,382 Answers
Posted on Sep 01, 2010

Anonymous

Master

Joined: Aug 03, 2010

Answers

2382

Questions

0

Helped

859966

Points

7450

Hi, raise vehicle, support with safety latches/jackstands, remove splash guard from passenger front wheel well. Using a box-end 15mm wrench release tension from automatic tensioner. Noting belt routing, remove serpentine belt, replace with new one, reinstall splash guard.

Related Topics:

Trustworthy Expert Solutions

How do you change a serpentine belt on a 2007 forenza suzuki

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I need a diagram of a 2008 Suzuki Forenza serpentine belt

Changed the tensioner pulley on my 2005 Suzuki Forenza and I got the Serpentine belt back on but I cannot get it to tighten. I already replaced the pulley once thinking the one I got May have been bad,...

2003 Forenza - brake + battery warning lights turn on and off

I need a serpentine belt diagram for a 2007 Suzuki Forenza and there is no diagram anywhere on the vehicle.

I need the diagram for the serpentine belt on a 2005 Suzuki forenza

I need a diagram for installing a serpentine belt on a 2006 Suzuki Forenza, can anyone help me please? I looked through past posts, but I was unable to find any answers for this.

Need to find out where waterpump of a 2007 suzuki forenza is located

HOW TO INSTALL SERP BELT ON 07 SUZUKI FORENZA

Need diagram for serpentine belt

My valve cover is leaking. Do I need any special tools to replace it? Also, the serpentine belt needs replacing. Anything special about that? 2006 suzuki forenza. Thanks.

Not finding what you are looking for?

Cars & Trucks

I need a diagram of a 2008 Suzuki Forenza serpentine belt

Ask a Question

Check Out the Latest Top Trucks Report!

Top Suzuki Experts

ZJ Limited

Thomas Perkins

john h

Are you a Suzuki Expert? Answer questions, earn points and help others

Manuals & User Guides

Forenza OWNERS MANUAL.pdf....

Http://www.autodealertools.com/quickQu...

Http://www.autodealertools.com/quickQu...

Related Topics:

Trustworthy Expert Solutions

How do you change a serpentine belt on a 2007 forenza suzuki

1 Answer

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

I need a diagram of a 2008 Suzuki Forenza serpentine belt

Changed the tensioner pulley on my 2005 Suzuki Forenza and I got the Serpentine belt back on but I cannot get it to tighten. I already replaced the pulley once thinking the one I got May have been bad,...

2003 Forenza - brake + battery warning lights turn on and off

I need a serpentine belt diagram for a 2007 Suzuki Forenza and there is no diagram anywhere on the vehicle.

I need the diagram for the serpentine belt on a 2005 Suzuki forenza

I need a diagram for installing a serpentine belt on a 2006 Suzuki Forenza, can anyone help me please? I looked through past posts, but I was unable to find any answers for this.

Need to find out where waterpump of a 2007 suzuki forenza is located

HOW TO INSTALL SERP BELT ON 07 SUZUKI FORENZA

Need diagram for serpentine belt

My valve cover is leaking. Do I need any special tools to replace it? Also, the serpentine belt needs replacing. Anything special about that? 2006 suzuki forenza. Thanks.

Not finding what you are looking for?

Cars & Trucks

I need a diagram of a 2008 Suzuki Forenza serpentine belt

Ask a Question

Popular Questions

Transmission sensor problem

I would like a diagram

Fault Code P2135

2007 Suzuki Forenza. It is

White Smoke From Tail Pipe/Exhaust

Check Out the Latest Top Trucks Report!

Top Suzuki Experts

ZJ Limited

Thomas Perkins

john h

Are you a Suzuki Expert? Answer questions, earn points and help others

Manuals & User Guides

Forenza OWNERS MANUAL.pdf....

Http://www.autodealertools.com/quickQu...

Http://www.autodealertools.com/quickQu...