Firing order for 2000 Ford Taurus - 2000 Ford Taurus

Question edited for clarity.
Question moved to model category.

Diagrams in this link and image below

https://www.google.com/search?q=2000+Ford+Taurus+SE+3.0+firing+order

if it was the firing order the car engine would be shaking real bad and the engine would backfire. try disconnect the air mass sensor. if you have a bad air mass sensor and you disconnect it, your power will return to normal.

The firing order is 1-5-4-2-6-3-7-8,according to my Chilton manual. The distributor turns counter clockwise and #1 is to the driver's side of the back clip. Hope this helps.

check here for all dodge firing orders http://autorepair.about.com/library/firing_orders/bl-dodge-firing-02.htm

http://www.askmehelpdesk.com/attachments/a/24775d1253537596-firing-order-2005-ford-taurus-firing-order.gif?stc=1

1-4-2-5-3-6 0N REAR SPARK PLUGS ARE 1-2-3 FRONT 4-5-6

FIRING ORDER IS 1 4 2 5 3 6. STANDING IN FRONT OF CAR ON PASSENGER SIDE FIRST CYLINDER FRONT IS 1 2 3 ON DRIVER SIDE FIRST CYLINDER FACING YOU ARE 4 5 6 SEE 1 CYLINDER FACING YOU ON PASSENGER SIDE.GET A PIECE OF PAPER WRITE NUMBER ON TOP ACROSS LARGE NUMBERS 3 2 1 AND BOTTOM OF PAPER WRITE NUMBERS 4 6 5 THATS COILS WIRES FIRING ORDER TO SPARK PLUGS.

1-4-2-5-3-6

Here is the firing order picture:

Hi..
Your 00 taurus 24v,
Use a Direct ignition, It's mean COIL on PLUG.
Each cylinder use one coil.
The firing order is ; 1-2-3-4-5-6..
The cylinder 1-2-3 are located at the FIREWALL side, starting from the Belt Side..
4-5-6 are Located at the Radiator side, starting from the belt .