I need a diagram of where the spark plug wire go and the cylinder numbers

1-4-2-5-3-6


Cylinder numbering:

• Windshield side
  1--2--3
  4--5--6
  Frt. Of vehicle

Coil numbering:

• • --4 PIN--
    ----------------
    --1--- 2--- 3--
    ----------------
    --5--- 6--- 4--

OKAY STANDING IN FRONT OF ENGINE ON LEFT SIDE CYLINDERS FACING YOU IS 1 3 5 ON RIGHT SIDE DRIVER SIDE CYLINDERS FACING YOU IS 2 4 6 LOOKING AT DISTRIBUTOR CAP NUMBER 1 SPARK PLUG ON CAP IN THE 9 OCLOCK POSITION YOUR NUMBER 5 SPARK PLUG ON DISTRIBUTOR CAP IN 6 OCLOCK POSITION .STARTING AT NUMBER 1 SPARK PLUG ON CAP COUNTING CLOCKWISE COUNTING 1 2 3 4 5 6 THATS YOUR SPARK PLUGS WIRES ON CAP TO ENGINE PLUGS. 6 PLUG WIRE ON CAP IS AT 7 OCLOCK POSITION.

2.3L 4 cylinder? After removing the plastic engine cover, look at the top of the ignition coil.


It should be numbered 1 through 4.

This is plug number 1 on the engine:


Just wire them 1, 2, 3 and 4 to the corresponding numbers on the ignition coil.

best wishes

Insofar as your Ignition Wiring Diagram, I hope you're speaking of what's also called the Spark Plug Cables or Firing Order. The proper Firing order for your V-6 is 1-5-3-6-2-4 with the number 1 cylinder being the front spark plug on the left hand side. The left hand side is Odd numbered and the Right hand side is Even numbered, therefore number 2 cylinder is the 1st plug on the right hand side of the engine.

The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

If u can't see the diagram go to the link, just match up the numbers on the coil to the engine cylinder numbers.

http://autorepair.about.com/library/firing_orders/bl-fo-5630.htm

153624Bring # 1 piston up on compression stroke and see where the rotor is ointing, That is the tower you put #1 on. then 53624 in the direction of rotor rotation. Put a piece of tissue in #1 plug hole and when it blows out, its on the compression stroke.

go to the link for info u need.

http://autorepair.about.com/library/firing_orders/bl-fo-10384.htm

with the crank facing the radiator.......cylinders 1,3,5 on the left....cylinders 2,4,6 on the right......firing order is 1,2,3,4,5,6...

with the crank on the passenger side.....cylinders 1,3,5 or on the firewall.....cylinders 2,4,6 or next to the radiator...firing order is 1,2,3,4,5,6..... numbers should be on the ignition coil....good luck

let me know

mtg