At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ECT is an acronym for Electronically Controlled Transmission and the ECT PWR button is a function of the redesigned transmission. When pressed, the ECT PWR button will adjust shift points so you can reach higher RPM levels before shifting into the next gear.
I assume you mean the "ect power " light. This means the trans computer will hold each gear a little longer before changing down. It is turned on and off by a button on the console
Hello. Welcome to FixYa. Please allow us to assist you.
The ECT PWR light is on because someone has inadvertantly bumped the switch. Look on the console, by the shifter, or on the dash for a switch labeled ECT. Turn it off, and the light will go out.
The ECT PWR mode, when activated, increases the time that the transmission shifts up thru the gears. Without the mode selected, the first shift would be at 18-20 mph. With the mode selected, the first shift would be 20-22 mph. This mode basically allows the shift to occur later, and is normally used when you are towing something, or if you have a large load of cargo in the car.
Thanks for choosing FixYa for assistance. Have a great day.
there should be a switch that says power/econ the light means you have it set for power ,find the button and push it and it will read econ, it is usually a green button on the center console.this changes the shift characteristics of your vehicle.
Hi there;
The ECT PWR switch. ECT stands for Electronicaly controled transmission. This switch controls the shift pattern of the transmission. In the PWR possition it will delay the shifts somewhat to give your car more power.
You would use this if you are in a possition where you need to accerate quickly from a light or to pass someone & need more power.
The ECT/power light is controlled by the ECT switch on the console. WHat it does is stretches the shift point from 1-2 and 2-3 when you are carrying a large load, or towing something. For maximum fuel economy, the light should be switched off.
×