Need a diagram to put on belt for a 1997 oldsmoible88

need help putting my 1997 honda accord in time.I got the cam pullie on top and crank top dead center.does the oil pump gear haft to go straght up too.and one more thing when we get the belt on it keeps tring to roll offneed help bad.Can anybody help please?

1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N V
Belt Routing Diagram Multiple Accessory





1997 FORD MUSTANG - V8 4.6L 281ci GAS FI N X
Belt Routing Diagram Multiple Accessory



Hope this help (remember rated and comment this).

1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI N K
Belt Routing Diagram - Multiple Accessory




1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Idler, Tens. & SC





1997 PONTIAC BONNEVILLE - V6 3.8L 231ci GAS FI S 1
Belt Routing Diagram - Multiple Accessory




Hope help with this (remember rated this help).

Sorry for the delayed response.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/1997/make/pontiac/model/bonneville/1997_pontiac_bonneville_drive_belt_routing_diagram.htm

Hello there:
here is the diagram for you just click on the routing diagram in blue and it will show you the routing diagram

1997 BUICK LESABRE - V6 3.8L 231ci GAS FI N K
Belts / Tensioners / Pulleys Part Number Description 5060937
Belt Routing Diagram Multiple Accessory

1997 JEEP CHEROKEE - L6 4.0L 242ci GAS FI N S
Belt Routing Diagram - Multiple Accessory, w/A.C.





1997 JEEP CHEROKEE - L4 2.5L 150ci GAS FI N P
Belt Routing Diagram - Multiple Accessory, w/A.C.



From DAYCO Catalogue.

Hope helped with this; remember rated this help. Good luck.

Sorry for the delay.
I am personally going back to answer your unanswered question. I do not know if you still need the answer, but I am going to answer it in case you still do.
Harmonic Balancer on a '97 Plymouth Voyager?
Click on the following direct Links. The first Link has the Timing Belt Diagrams that you will need. The second Link has the Serpentine and Drive Belt (if applicable) Diagrams you will need.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
For the Timing Belt:
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_timing_belt_diagram_marks.htm
For the Serpentine and Drive Belts (if applicable):
http://www.2carpros.com/car_repair_information/year/1997/make/plymouth/model/voyager/1997_plymouth_voyager_drive_belt_routing_diagram.htm

1997 JEEP WRANGLER - L4 2.5L 150ci GAS FI N P

* Belt Routing Diagram Multiple Accessory, w/o P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/P.S., w/o A.C.



* Belt Routing Diagram Multiple Accessory, w/A.C.




1997 JEEP WRANGLER - L6 4.0L 242ci GAS FI N S

* Belt Routing Diagram Multiple Accessory, w/o A.C.



* Belt Routing Diagram Multiple Accessory, w A.C.



For more details, you can visit DAYCO Catalog

I hope help you with this. Good luck (remember rated this help).

This is the diagram but you should have factory belt diagram sticker is still somewhere under the hood
If not:
http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001D&l=n&catalog=auto&category=
To replace the serpentine belt on a V6 3800 you must jack up the motor and remove a motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack.
Driving without a belt can cause the motor to overheat, will cut power steering, and will not recharge the battery, so you should probably get a tow
Good Luck

There is a tensioner pulley attached to an arm.
Release the tension on the belt by undoing the pulley arm bolt, the belt will have enough slack to slide off the pulleys.
To put it back on, you find the diagram on the radiator guard or under the hood.