Firing order diagram for 1989 isuzu trooper 2.6

here is firing order and diagram.

Hello lil_reddminx,
The firing order is 1 2 3 4 5 6. The rotor turns in a clockwise direction, cylanders 1 3 5 are on the right side or passenger side of the engine 2 4 6 are on the left side. Number 1 location on the cap is about 7:00.

Regards,
netvan

The firing order is 1-2-3-4-5-6. This engine has coil on plug ignition.

Here is the firing order diagram for that vehicle.

Check this for 1994 Isuzu Trooper 3.2 liter DOHC V-6 (6VD1)



Hope that helps (remember rated this help) Good luck.

Hello philb833> My name is Roger and I will help you. Here is the information you asked for. Please rate the qaulity of the answer. This is how we know you recieved the correct answer. The fire order is 1-2-3-4-5-6. see the picture.Thank You for using FixYa.Roger

Here u go.

Need to have the Coil packs and the Ignition Control Module tested at someplace like auto-zone. I'm willing to bet thats your problem.

perhaps this is is a good start..will look around more for you also..good luck
http://www.car-stuff.com/mmparts/isuzu-trooper/repair_manual.html

Hi,

Assuming your 1995 Isuzu Trooper is using the 3.2 SOHC engine, the firing sequence would be as shown here.
. This was originally posted here. An actual image which was originally posted here.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.