At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do I reset my GMC Acadia "change oil" light? ...
It's in your manual, but I recall it to be...
Turn the ignition key to "run" and then depress the gas pedal three times down, and let off...then wait for yor light to flash, then key off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
GMC Acadia no heat coming from heater Questions ... - Fixya
www.fixya.com > ... > Cars & Trucks > GMC GMC Acadia cars & trucks no heat coming from heater questions and answers. ... on my GMC Acadia 2008 SLE the panel where i control the AC/Heater stopped ...
cycle through the driver information center until the oil change percentage Is showing, once it is on the screen hold down the check mark button until it reads 100%. If you don't have the info center buttons - turn key to on without the engine running and step on the gas pedal three times (all the way to the floor and then back off) quickly. Either of these should reset it.
SWITCH IGNITION ON ENGINE OFF.REPEATEDLY PRESS VECHICLE INFORMATION BUTTON UNTIL OIL LIFE REMAINING PERCENTAGE IS DISPLAYED.PRESS AND HOLD SET/ RESET BUTTON UNTIL 100% DISPLAYED.CHIME WILL SOUND 3 TIMES AND CHANGE ENGINE OIL SOON MESSAGE WILL GO OFF.YOUR VECHICLE INFORMATION BUTTON IS THE LITTLE SQUARE BUTTON WITH A LITTLE CAR SYMBOL WITH LETTER i AND THE SET/RESET BUTTON IS THE LITTLE SQUARE BUTTON WITH THE CHECK MARK ON IT.THE BUTTONS LOCATION IS ON RADIO PANEL WHERE RADIO AND GPS IS.
You will need to take the tire off of the side that the light is burned out on. Then remove plastic fender well insert. This will give you the enough room to change out any burned out light in the headlamp assembly.
{: ) If the vehicle does not have a Driver Information Center (DIC):
Turn the ignition to ON, with the engine off.
Fully press and release the accelerator pedal slowly three times within five seconds.
Turn the key to OFF.
If the CHANGE ENGINE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.
If the vehicle has a DIC:
Turn the ignition to ON, with the engine off.
Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET.
Press and hold the SET button until 100 percent is displayed.
You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
Turn the key to OFF.
If the CHANGE ENGINE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.
×