1991 toyota camry---no low beam lights, high beams working fine

Here is a YouTube video that answers your question and provides a lot of good information.

https://www.youtube.com/watch?v=TG3zx8cCREA&ab_channel=PeterFinntheCarDoctor


Peter

low beam bulb quit

headlight relay or switch

the relay for your highbeem lights is bad, replace it and you should be good, or you could just switch the high beem relay, with the low beem relay, they are the same, and if the high beems work like that you know its full proof, if not... well you know, we will hafta move to something else.. hope you find this helpful

for the brake lights check your fuses and relays and for your low beams your multifunction lever needs to be changed.

It could be in the switch for the low and high beam's

your cars low beams and high beams are connected to a different fuse. Check the fuse for your lowbeams and instrument panel

yes you are right it is the blub that need to be relace

I have checked the Toyota web sites and the general conscientious is the high beam switch is defective.

You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car)
Paul G Schmidt
[email protected]