My clutch is not angaging need to see how can i bleed

Hydraulic Clutch System BLEEDING The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure. The maximum line pressure while pressure bleeding must not exceed 36 psi (248 kPa). NOTE: To bleed a clutch manually requires the assistance of a second person, a section of hose that is compatible with brake fluid (preferably clear) and fits the slave cylinder bleed screw snugly and a container to catch the fluid that is bled through the system. As brake hydraulic fluid easily absorbs moisture, always use fresh fluid when bleeding a hydraulic system.

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. To bleed the system perform the following:
   1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle's hydraulic system.
   2. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
   3. Close the clutch slave cylinder bleed screw.
   4. Release the clutch pedal.
   5. Check the hydraulic fluid level and top off as necessary.
3. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.