On the brake brake calipper ther is a small fitting on it the size of the fitting bolt is 8mm or 10 mm loosen the bolt and then inser a transparent hose with a small emty bottle of brake fluid...just make a small hole on the bottle cup and insert the hose on it..someone will press the brake ten times then press it stedy and then open the fitting on the brake calipper repeat this proceedure untill u can see that there is no bubles comming out on the hose...but check the fluid bottle make it sure that there is always fluid on it....if u do the bleeding engine should be running......
kads252
Fig. 1: Loosen the front brake line in order to bleed the master cylinder
Fig. 2: Connect a bleed hose from the bleed valve on the front caliper to a jar of brake fluid
Fig. 3: Always follow the lettered sequence when bleeding the hydraulic brake system
Hope this helps to solve it; remember to rate this answer.
364 views
Usually answered in minutes!
×