At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: How do you adjust the headlights on a 2000 model...
Raise the hood and look for two small screws on the headlight, one is closer to the radiator for side to side adjustment and the other is for up and down adjustment.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the transfer case control module is located behind the left side of dash behind the headlight switch, you will need to remove the speedo trim around speedometer, then pull put the headlight switch. the module is just snaped into place. also keep in mind, the module has to programmed with software for it to work correclty. in other words, the replacement module will have to be programmed after installing
i always measure the center of headlights up from the ground. then i put vehicle 10 feet from wall and and then i measure up the wall and adjust lights to aim 2 inches lower than the center measurement. Now for the side to side i sit in truck and aim the driverside straight and the passenger slightly to the right.
I had tha same problem it was the high pres. fuil pump. mine was 2000 rpms and 25 to 30 mile an hr was all i could get out of mine. hope this help you out.
Turning the screw should be all you have to do. Not sure which way but if you have it lined up on something after dark you will be able to tell if your going the right way.
you have a relay problem...look under the chevy forum.com or simply google the schematics for electrical relays for your year make and model..GOD bless
×