SOURCE: how do you remove the door panel on a 1997 corvette?
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
SOURCE: 1992 corvette Lt1
You have to remove the door lock knob to get to the screw. Make sure door is unlocked,then you take an pull the knob outward til pops off.Then you should be able to remove the screw.
SOURCE: I need to remove the interior panel on the driver
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. then you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
SOURCE: How to remove interior door panel on 2006 c6
They say it best here,I hope this helps. Tehy are replacing door handles, good luck.
http://dsvettes.com/new/pdf/DSV_passenger_door_handle_install.pdf
http://dsvettes.com/new/pdf/DSV_driver_door_handle_install.pdf
SOURCE: The third door on my 98 silverado will not open.
You may need to open it up with a Slim Jim...just as if you locked your keys in the car....
253 views
Usually answered in minutes!
×