At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'm not too familiar with the Sequoia, but I believe the Cabin Air Filter is located behind the Glove Box. Figure out how to remove the glove box carefully and it should be behind a rectangular cover.
Po300 codes are system generated caused by computer can not locate real failure condition. Coil on plug engines the coil boots fail and wider gap spark plugs wrong spark plugs by design, secondary ignition wires, vacuum leaks, poor fuel quality, plugged fuel filter, low fuel pressure , leaking pressure regulator, unmetered air between mass air flow sensor and throttle body, crankcase ventilation leak.
remote door lock basically unlocks and locks using air pressurized not wires or gears air pressure is directed from a littlepump that compresses the air to shoot out the lock probably it is the air line not the pump itself
Chances are the electronic/digital HVAC control unit is bad. This same problem happened to me and I had to replace the entire unit. The dealer wanted to charge $800 for just the part! After I freaked out on them, they found a used one for less than half. Sorry, but there's no easy fix here.
×