Near the serpentine belt tensioner, nearest the crankshaft pulley, passenger side of vehicle, 2 bolts holding it to the block.
The crankshaft sensor sit between the a/c compr and the crankshaft pulley, sensor bolts to the side of timing chain cover, only 1 bolt holds it in place, only one, disconnect sensor harness, remove 10 or 8 mm bolt, sensor will slide right out. Hope this was very helpful.
Crankshaft sensor is the one to the right of a/c compr.
Fig. Crankshaft Position (CKP) Sensor-3.0L Engine
Fig. Crankshaft Position (CKP) Sensor-3.9L Engine
Hope this helps (remember to rate and commet this answer).
1,866 views
Usually answered in minutes!
×