2000 Lexus ES 300 Logo

Related Topics:

Posted on May 02, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Installation of the Lexus ES300 muffler consists of course of the muffler and bolts to attach the muffler to the tail pipe, it also has wax like donut which is inserted into the muffler where the tail piple meets. My problem is there are a couple of long springs that go either between the muffler and the tail pipe OR on the tail pipe side. Which ever way it goes the bolts go through the springs to (I suppose) ensure proper spacing to ensure the wax like donut is not over compressed. The question is where does the spring go? Thanks for any assistance.

1 Answer

Bill Boyd

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Lexus Master 53,816 Answers
  • Posted on May 02, 2017
Bill Boyd
Lexus Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jan 04, 2013
Answers
53816
Questions
7
Helped
11934100
Points
172802

The bolt goes through the both flanges and the springs go against the last flange and under the nut of the bolt
it is a system that allows movement between the couplings so that the system doesn't crack from fatigue due to engine/ , pipe movement

5 Related Answers

Anonymous

  • 1861 Answers
  • Posted on Sep 12, 2008

SOURCE: 2002 Lexus ES300 - Replacing the driver's side outside rear tail light

Easy. You can do it. Nothing special other than the clips that hold it in may be tight.

Ad

Anonymous

  • 15935 Answers
  • Posted on Jan 22, 2009

SOURCE: 2006 LEXUS IS 250 OR 2003 LEXUS ES300

How does the ES 300 fit your driving style?
Conservative drivers your dream come true, Smooth, comfortable and quiet, easy to control and predictable. This car is the one to beat.

Sporty drivers Electronic throttle is very responsive, handles well for a car with such a cushy ride, Not as powerful as the other cars in this class.

Fast drivers Should opt for the Adaptive Variable Suspension. The firm setting provides this car with the character you are looking for as far as handling goes, but for all around performance, you may be happier with a Lexus IS300 or maybe an Acura TL Type S.

The answer to your question - the IS-250 is a luxury model, and the IS is sporty.

Both considered in the same CLASS of vehicle - near Luxury.

Who should buy this car? A person who is looking for a mid-sized sedan that is a cut above the average sedan in styling, comfort, luxury & performance.


Thank you for using FixYa - A FixYa rating is appreciated!!

Anonymous

  • 840 Answers
  • Posted on Jan 26, 2009

SOURCE: Hi, Trying to place a

yes it should be snugg bulb will stay in after you put the spring back in

Anonymous

  • 1 Answer
  • Posted on Mar 27, 2009

SOURCE: how to change lexus es300 2002 cabin air filter

I just changed the cabin filter of my ES300. I found the instructions on the manual, under airconditioning and audio. It's pretty easy to do. I bought the filter from Kragen's for $21.95.

Anonymous

  • 48 Answers
  • Posted on Apr 21, 2009

SOURCE: Lexus ES300 trunk leaks when it rains

This may sound odd but if you can put a small person in the trunk with a flashlight while you pour water in the areas suspected, they can trace the leaking area, believe it or not I used to use this method while I was a Ford mechanic. Otherwise, maybe you can apply clear or black silicone to the area or remove the screw or bolt and coat it with silicone and replace it.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1999 Blazer ZR2. Replacing muffler and tail pipe. Can not pull apartl flange on muffler and exhaust pipe. Bolts broke off and still can't break. Don't have air impact chisel. Would heat help.

The auto store probably sells a big chisel and a 4 lb hammer? If your going to replace anyway, use a hack saw. In my younger days, I've cut many a tail pipe with a hack saw. So a new muffler and tail pipe will have new flanges? I can't see anything from here.
0helpful
1answer

94 lexus es 300 leaking gas and white smoke from exhaust tail pipe and when I turn off the car it starts to pour out of the same spot

Charles, after searching the net., stuck injectors,faulty fuel pressure regulator or faulty ECU. Have a good Tech, check engine codes, diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
White smoke out of exhaust not what you think Club Lexus Forums
Es300 Smoking Bad And Gas Smell Help
http://www.automotiveforums.com/t967184-_93_lexus_es300_fuel_in_exhaust_runs_rough.html
0helpful
2answers

1993 lexus es300 power steering

sounds like an engine issue to me rings or valve seals probably
1helpful
1answer

Starter relay location for 1999her Lexus ES300

Before servicing the vehicle, refer to the Precautions section. Remove or disconnect the following:
Drain engine coolant
V-bank cover
Accelerator cable
Intake air connector
Throttle Body
Upper and lower intake manifold assembly
Rear water bypass joint
Water bypass pipe
Water bypass pipe from the water pump
Wire clamp from the bracket on the water bypass pipe
O-ring from the water bypass pipe
Water bypass pipe bracket from the water bypass pipe
2 bolts holding the starter to the cylinder block
Starter connector
Starter from the cylinder block
Nut, and disconnect the starter wire
Starter

Replacing a starter on 1999 Lexus ES300 was not all that hard. You had metric socket and combination wrenches and a phillip's screw driver. In this video show you how uninstalled the starter and then replaced it in pretty good detail. This starter is used in 1998 to 2001, and so basically you could use the same procedure that is shown there.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.
1helpful
1answer

How do I go about fixing my muffler system I lost the bolts out of the front and it is draging on the road. It got caught up aon a large piece of ice a couple days ago. I have some of the materials needed....

You don't need a man. Go to an auto parts store. Tell him/her the model, engine size and describe the damage to the exhaust system. They will provide you with clamps, brackets and suggest tools that would make the job a bit easier. If you can drive the car to the store they will be better able to assess the damage and provide you with what you need. There are various types of hangers to attach the pipes to the frame. You might also need some tail pipe bends (adapters). If you can use a hacksaw you may be able to replace the muffler as well.
0helpful
1answer

How do i replace the tail pipe

The tailpipe is attached to the muffler......so unless you are able to cut off and reweld a new piece on, you will have to replace the muffler assembly, which is a simple case of 2 bolts and rubber hangers.....
4helpful
1answer

Cannot find thermostat of 99 Lexus ES300

1999 Lexus ES300 (3.0L, VIN F, 5th digit, 1MZFE engine)

Thermostat on 1mz-FE Engine
  1. Disconnect the negative battery cable. Wait at least 90 seconds before performing any other work.
  2. Drain the engine coolant.
  3. Remove the battery.
  4. Remove the air cleaner inlet assembly.
  5. Remove the air cleaner assembly with hose.
  6. Remove the air cleaner bracket.
  7. Remove the air cleaner inlet No. 1.
  8. Disconnect the radiator hose outlet.
  9. Remove the bolt and water inlet pipe.
  10. Remove the O-ring from the water inlet pipe.
  11. Remove the 3 bolts and water inlet.
  12. Remove the thermostat.
9b08ecc.jpg

Fig. Correct alignment of the thermostat jiggle valve.-1MZ-FE and 3MZ-FE engines

Hope helps (remember to rate and comment this).

1helpful
2answers

When I start my 2003 ES300 smoke comes out the exhaust

The same thing happened to my 2003 ES300 - the smoke is coming from the oil seeping into the motor's cylinders. This is the classic "Oil Gelling" problem in Toyota and Lexus vehicles. There is a factory recall on it, but it only covers to 2002 ES300 not 2003. The Lexus dealer confirmed my "oil gel" problem and went to bat for me with Lexus - they got the repair approved - Thank you Mr Local Lexus Dealer! The cost was nearly $4,000 - paid for by Lexus.
0helpful
1answer

Size of strut bolt - 21mm or 22mm

If your talking about the large bolt and nut the attaches the strut to the spindle then that bolt is 22mm
Not finding what you are looking for?

228 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...