Https://www.amazon.com/Wagner-Lighting-9011-Halogen-Capsule/dp/B000C8XRHS/ref=sr_1_1?ie=UTF8&qid=1519697018&sr=8-1&keywords=sylvania+9011&dpID=31tCVzuzpiL&preST=_SY300_QL70_&dpSrc=srch
SOURCE: keyless remote wont work dont know how to program
I have a 2004 Kia Optima EX V6. You have to get a new battery for your key fob(s) and take to dealer to program it. It can only be programmed when they hook it up to the computer. Cost around 40 bucks from Kia. Call around some use to charge only 10 bucks. Good luck.
SOURCE: 2004 KIA Optima LX timing belt/water pump
The thing is your doing the timing belt the water pump is right their with it . it should cost you much more at all besides the cost of the water pump. When doing a timing belt I have a rule that I go by The timing belt/seals =cam , crank , any pulley & tensioner & water pump all get replaced at the same time. I did a t-belt on a Audi A-8 very complex whole front of car has to come off as well, he didnt want to do w-pump & thermostat his thermostat was their as well not even a month later the water pump gave out he had to pay double the price because he didnt want to do it when I had it apart the first time. And make sure mechanic is ase certified . good luck
SOURCE: 2001 kia optima lx keyless entry system reprogram
The 01 Optima had the keyless entry buttons right on the key itself. I'm not sure if the LX had the option... it was standard on the SE version. In any case, programming is done at the dealership, and is expensive. They use their special "code reader / writer" that plugs into the OBD II port under the dash. You provide all keys and they are recoded to the module that is located under the stereo. A cheaper option might be an aftermarket alarm installed at a local car audio shop. They are less expensive than you might think, even installed. Good luck.
P.S. the 01 Optima remote key had a problem with very short range. You needed to be within a few feet of the doors for it to work.
SOURCE: how do i remove the fron't door panal on a 2004
To removed the door panel. Remove 1
screw in the grab handle pocket, 1 behind the door open lever, and 2
screws at the forward edge, the bottom edge, and the rear edge. Remove
the small window-corner speaker if equipped. Then lift off the door
panel. Don't lift too far, there are wires to disconnect.
Door won't open?
For
those of you whose door is shut and you
cannot open it, here is the trick that the Kia mechanic.
Insert the key into the door lock. In one quick motion, simultaneously
turn the key to the unlock position AND pull the handle. It took us
several attempts to finally get it to work.
Testimonial: "thank you very much."
63 views
Usually answered in minutes!
×