What is the dash light srs, in a honda accord 2002 vtec engine 3.0

have a compression test done but I suspect a head gasket or cracked head

92-00 Honda Engine Swap Wiring Guide VTEC AND NON ...

honda-tech.com/.../92-00-honda-engine-swap-wiring-guide-vtec-non-vt...
Oct 8, 2011 - 92-00 Swap Wiring Guide for VTEC and Non-VTEC ... try to compile one thread that would try to answer pretty much 95% of all questions ... I wanted to do this because often times I end up posting the same thing to ... to ECU harness so using an EX/SI 92-95 engine harness will make VTEC plug and play.

97 accord non VTEC to VTEC ' HondaSwap

hondaswap.com > Model Specific > Accord
Jan 16, 2010 - 15 posts - ‎6 authors The distributors may be different on the vtec/non vtec. .... As was previously stated, allyou need to do is add wiring for VTEC. ... that connect to the ecu to the connectorsthat wire in your engine harness while the engine is out... f22b2 non vetec swap to f22b vtec need help asap
3 posts
Sep 22, 2012
96 accord head swap non vtec to vtec
10 posts
Jun 1, 2012
1990 USDM CRX Si D16A6 to ZC SOHC non-VTEC ...
20 posts
Mar 7, 2012
99 Accord non-vtec to vtec engine swap, need help
5 posts
Sep 27, 2011
More results from hondaswap.com

Yes the SRS (air bags) light could be related to the horn problem. Working on the SRS can be very hazardous so I highly recommend you take the car to your local Honda dealer and let an expert repair the SRS. The check engine light can be many things and a scan of the ECU will help in diagnosing the problem.

http://www.vidzshare.net/videos/EmasxgJdXJ8/how-to-change-timing-belt-in-a-vtec-honda-accord.html

Go to the above link and get a video explanation of how to replace timing belt in all accord with vtec engine...

1.1 o2s(ho2s)(s1) = eng
3.2 map circuit = high input eng
7.1 t p sensor(a) = voltage low eng

have it brought to a mechanic to diagnose the issue. the SRS light is warning you that there is a malfunction with your airbag system and that it may not deploy in an accident or could deploy suddenly without any further warning

ok lets break this down
Vtec= Variable Valve Timing and Lift Electronic Control

if you look on the the motor on the left side youll see 2 things the distributor and the vtec solenoid.. the vtec solenoidif the smaller of the 2 thats it m8 theres 2 wires running from it .. all vtec does is lift the cams on a high 3rd lobe :) rides in the middle of the 2 smaller cam's on a automatic it should pop around 5.200 rpms on a honda ecu thats not tuned.. also a exaust helps or a intake that produce a higher tone thats unmistakeable when vtec hits.. its a beautiful thing hit me up with any! honda stuff ive done swaps to my 92 prelude si 2.2l vtec and many more so i know a honda engine and wireing like theback of my hand

Right beloww throttle body toward front of car

Open the door of both sides (driver and passenger) and look for the panel for the fuses. Remove the panel and you will see the fuse box. The information of the fuses is on the panel.