Firing order for 5.7 hemi engine - 1996 Dodge Ram 1500 Club Cab

The 2012 5.7 Hemi firing order is:
• Coil...1-8-4-3-6-5-7-2
• Plug..6-5-7-2-1-8-4-3

Fig. Fig. 1: 2.0L (VIN M) Engine Firing Order: 1-3-4-2 Distributor Rotation: counterclockwise

Fig. Fig. 2: 2.3L (VIN A, D, and 3) and 2.4L (VIN T) Engines Firing Order: 1-3-4-2 Distributorless Ignition System


Firing Order: 1-3-4-2 -nl-> Distributor rotation: clockwise" rel="width:950,height:660" index="2" $included="null">

Fig. Fig. 3: 1985-86 2.5L (VIN U) Engine -nl-> Firing Order: 1-3-4-2 -nl-> Distributor rotation: clockwise

Fig. Fig. 4: 1987-91 2.5L (VIN U) Engine Firing Order: 1-3-4-2 Distributorless Ignition System

Fig. Fig. 5: 3.0L (VIN L) Engine Firing Order: 1-6-5-4-3-2 Distributorless Ignition System

Fig. Fig. 6: 3.1L (VIN M) Engine Firing Order: 1-2-3-4-5-6 Distributorless Ignition System

Fig. Fig. 7: 3.3L (VIN N) Engine Firing Order: 1-6-5-4-3-2 Distributorless Ignition System

Hello! If the engine in your vehicle is the 3VZ-FE...The firing order is 1-2-3-4-5-6...Distributor rotation is Counter Clockwise...



If the engine is a 2JZ-GE...The firing order is 1-5-3-6-2-4...Distributor rotation is Counter clockwise


Guru...........saailer

I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

Fig. 3.0L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system

Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system

Fig. 3.0L Engines without DIS Firing order: 1-2-3-4-5-6 Distributor rotation: Counterclockwise

Fig. 3.0L Engines with DIS Firing order: 1-2-3-4-5-6 Distributorless ignition system

Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system

Fig. 3.0L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system

Fig. 3.5L and 3.8L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
Back to Top

Here ya go...found the block for the reply....

3.8L engine Firing order: 1-2-3-4-5-6 Distributorless Ignition System

Here is the firing order diagram for that engine.

For ALL 2004 Dodge RAM (1500, 2500, and 3500) (2WD and 4WD) 5.7L V8 Hemi:

.........Firing Order:
Coil...1-8-4-3-6-5-7-2
Plug..6-5-7-2-1-8-4-3

This should have been located at the top of the your Intake Manifold.

Let me know if this helped...

The firing order is a sequence of ignition time when the engine cylinders deliver their power-strokes starting with the number-one cylinder. If this sequence is faulty or arranged disorderly, the engine may not start at all, and if it does start, it may does so hesitatingly, or not run enough well to enable it to drive-or simply lacks the power to move. A waste of gas, and unecessary tear and wear on the engine and its critical components ultimately result. Once the firing oder is correc and in proper sequence, the engine should starts easily and promtly, running as quietly as posiible.

For Dodge 2004 Durango firing-order:
All 6-cylinder K 3.7L MFI SOHC distributorless ignition:
1-6-5-4-3-2 (front 2-4-6) (back 1-3-5)

All 8-cylinder N 4.7L SFI (including HEMI 4-WD)
1-8-4-3-6-5-7-2 (front 2.4.6.8) (back 1.3.5.7)
(distributorless ignition)
It is also a good thing to try and compare the thread lenghts of the old spark-plugs being replaced with the new.

Fig. 3.0L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributor rotation: Counterclockwise


Fig. 3.0L Engines without DIS Firing order: 1-2-3-4-5-6 Distributor rotation: Counterclockwise



Fig. 3.0L Engines with DIS Firing order: 1-2-3-4-5-6 Distributorless ignition system



Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system

Tjhis is the best diagram avil other than a very expensive factory manual. go to link

http://autorepair.about.com/library/firing_orders/bl-fo-0138.htm