I have a 1994 oldsmobile 88 Royale with a 3.8 v6. I have asked this question to 2 "experts" and no one seems to be willing to answer this question: There is linkage that goes from the lock cylinder down the interior of the steering column until it meets up with the ignition switch pushbutton which is mounted on the lower steering column below the dash. When you turn the key to the start position it is to move the linkage (i believe) so it engages the pushbutton so the car will start but the linkage does not move. I have tried pushing and holding the pushbutton down while cranking the key but my engine will still not turn over (which is what my problem is). I have power going to the gauges when I turn key to on position and fuel pump and injectors prime up- but will not turn over. Power is not getting to the selenoid and I know That I may have a problem with the security system but that still does not change the fact that my linkage is not moving and it should be even if the battery was disconnected -