Need a diagram to replace the crank pulley on a 1990 Oldsmobile regency 98 3.8 liter

This is what I found on the 98 Regency instructions: Crankshaft Damper REMOVAL & INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the belts from the crankshaft pulley.
3. Remove the crankshaft damper attaching bolt.
4. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud or radiator may be necessary for clearance. WARNING
   DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
   
5. Installation is the reverse of removal. Torque the damper bolt to specification. Fig. 1: One example of a crankshaft damper puller tool
   Fig. 2: Removing the crankshaft damper boNeed a diagram to replace the crank pulley on a - 85843193.jpgc="/uploads/images/85843193.jpg" alt="85843193.jpg" class="h_mi" /> Fig. 3: Do not attempt to pry on the damperNeed a diagram to replace the crank pulley on a - 85843194.jpgt from the crankshaft, use a puller only Fig. 4: Removing the damper from the crankshaft Fig. 5: When installing the damNeed a diagram to replace the crank pulley on a - prev.gifead the bolt by hand first to prevent cross-threading