Firing order diagram for 96 dodge ramp 1500 van v6 3.8 engine

3.9L V6 engine firing order is 1-6-5-4-3-2, cylinders on the pass side front to back are 2-4-6, cylinders on the driver side front to back are 1-3-5.

Not sure of your engine size so please pick the appicable diagram:

2.5L Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise

3.9L Engine Firing Order: 1-6-5-4-3-2 Distributor Rotation: Clockwise

5.2L and 5.9L Engines Firing Order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

5.2L and 5.9L engine Firing Order: 1-8-4-3-6- 5-7-2 Distributor rotation: Clockwise

Here is a firing order diagram for that engine.

Here is a firing order diagram for that vehicle with a 5.2 liter or a 5.9 liter V-8 engine. If it has a 3.9 liter V-6 engine then let me know and I also have that firing order diagram if you require it.

There were three different engines for that vehicle in 1996, here are diagrams of the 3.9 liter V-6 engine, and the 5.2 and the 5.9 liter V-8 engines both have the same firing order.

3.9 liter V-6 liter engine;





5.2 liter/5.9 liter engines;

For the 2.4L:
Firing Order:
1-3-4-2
Cylinders:
1---2---3---4
(front of Van)
Ignition coil:
1----4
2----3
(front of the Van)

For the 3.0L
Firing Order:
1-2-3-4-5-6
Cylinders:
1----3-----5
2----4-----6
(front of Van)
Distributor:
-----2-----1------
3----------------6
-----4-----5-----
(front of Van)

For the 3.3L:
Firing Order:
1-2-3-4-5-6
Cylinder:
1----2----3
4----5----6
(front of Van)
Ignition Coil:
6---3
4---1
2---5
(front of Van)

For the 3.8L:
Firing Order:
1-2-3-4-5-6
Cylinders:
1---3---5
2---4---6
(front of Van)
Ignition Coil:
6---3
4---1
2---5
(front of Van)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

You have several RAM sub-models in here:
Normal 0 21 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} B1500 RAM Van
B2500 RAM Van
B3500 RAM Van
RAM 1500 1/2 ton 2WD
RAM 1500 1/2 ton 4WD
RAM 2500 3/4 ton 2WD
RAM 2500 3/4 ton 4WD
RAM 3500 1 ton 2WD
RAM 3500 1 ton 4WD

Chrysler Full-Size Trucks 1989-1996 Repair Guide
To avoid confusion, remove and tag the wires one at a time for replacement.





Fig. 1: 2.5L 4-cylinder Engine. Engine Firing Order: 1-3-4-2. Distributor Rotation: Clockwise




Fig. 2: 3.9L V6 Engine. Engine Firing Order: 1-6-5-4-3-2. Distributor Rotation: Clockwise




Fig. 3: 5.2L and 5.9L V8 Engines. Engine Firing Order: 1-8-4-3-6-5-7-2. Distributor Rotation: Clockwise




Fig. 4: 8.0L V10 Engine. Engine Firing Order: 1-10-9-4-3-6-5-8-7-2. Distributorless Ignition


Hope helped with this (remember rated this help) Good luck.

the firing order is usually stamped on the engine itself. Take off the distributer cap and turn the ignition to see which direction the rotor is turning.

The distributer cap has the number 1 plug marked . After finding the firing order, place the wires 1 where the cap is marked then in the direction the rotor is turning (ie:clockwise or couterclockwise). Keep looking . Most every motor I have seen has the firing order maked right on the engine.Or the owners manual ?

Here you go:
5.2L and 5.9L engines Firing order: 1–8–4–3–6–5–7–2 Distributor rotation: Clockwise

Diagram link below:

http://www.chiltonlibrary.com/content/images/7924/images/79243g14.gif

Best of luck!
Greg