Usually the timing marks are on the front pulley.another way to replace the cam belt,is to mark the belt and each pulley with correction ink[white] and then just transfer the marks over to the new belt and then align each pulley to the marks.thats easier if the old belt hasnt moved or jumped a tooth.most *** motors have the timing marks for cambelt replacement easy to spot with corresponding raised bits of ali pedestals next to them
SOURCE: How do I remove Head Light assembly on my 1999 Lexus RX 300
After removing the top and side bolts (which are obvious) Go to the fender liner. Remove all but the top screw . You will find (by flashlight or shop light) two bolts coming out of the headlight rear. With a socket wrench and 10mm socket, remove the two nuts on the headlight and pull out the headlight from the front after insuring the bulbs are removed and identified for reinstall. Take your time. It is not difficult.
SOURCE: WHEN DOES 1999 LEXUS 300RX 4WD TIMING BELT HAVE TO BE REPLACED?
90000 is a suffficiently long time for a timing belt. I'd listen to the dealership.
SOURCE: When is a timing belt need to be changed for RX
by 80,000 miles is a good time along with a new water pumo since its right there with it riding on the belt
593 views
Usually answered in minutes!
I am replacing the timing belt on a 3.oL motor and Ineed to know the location of the timing marks both on the cams and the crank
×