2004 Land Rover Discovery Logo
Posted on Jun 27, 2010

P1414 P1417 2003 discovery

Check engine light is on whats wrong?

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Nov 16, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Nov 16, 2010
Answers
1
Questions
0
Helped
1875
Points
1

Those codes are associated with the Secondary Air Injection. I too had the same codes on my 2003 Discovery. From reading Land Rover forums online, I determined that it is likely the Secondary Air Injection Solenoid that has gone bad. It is a $20 part that you can buy on atlanticbritish.com and install yourself without any tools. The hardest part was getting the original solenoid off -- it is simply clipped on with a plastic arm that is built into the part.

Does your Secondary Air Injection come on at random times? Mine would also come on sometimes at stop lights even after the engine had already warmed up. That is another sign that you might have the same problem and need to replace the solenoid. Before I replaced the solenoid, I had turned off the check engine light and noticed it came back on immediately after the secondary air injection went off after starting the truck cold a few times. After replacing the solenoid, I have yet to see the check engine light return.

Hope that helps.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

3.8l. What are the probable causes of DTC P1414?

P1414 Secondary Air Injection System Monitor Circuit High Voltage. High voltage is usually a short. Remove the air pump and check it out, it may be corroded or water in it. God-Bless! And the wiring to it.
0helpful
1answer

What is code p1414 on Dodge ram hemi engine

ok code p1414 is a secondary air injection system monitor circuit high voltage air pump short, code p3400 is a faulty cylinder deactivation solenoid,it could be a fault in the harness or poor electrical connection
0helpful
1answer

I have a 2006 Dodge Durango Limited (HEMI) that is giving me a code of P1414. What is this and how to fix it?

P1414-CYLINDER 4 REACTIVATION CONTROL PERFORMANCE

this happens sometimes during a flash.
just pull fuse 11 for 15 seconds to clear it and restore idle quality.
2helpful
1answer

ENGINE CHECK WARNING LIGHT ON

Before you can even attempt to correct what's wrong with the car you're going to need to obtain the trouble codes associated with the light. If you do not have access to an OBDII scanner you can take the car to most any parts store and they will check the codes for free. Then post them here and we can guide you.
0helpful
1answer
1helpful
1answer

Service engine soon. Light is on with now obvious

take it to auto zone. They scan the computer for free and can tell you what is up!
0helpful
1answer

What does service code p1414 mean on a 1996 ford taurus ? The service engine light stays on.

Secondary Air Injection system = SMOG pump
Check for fuses or stuck relay
1helpful
1answer

Check Engine and Service Engine lights both on

No fuses control those lights, and while I'd ignore the service engine, check engine suggests something is wrong and should not be ignored!
You could buy yourself a nanocom or similar and reset your service light and read the fault code to tell if the check engine is an intermittent error or something potentially more serious!
Not finding what you are looking for?

1,885 views

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...