Cars & Trucks Logo

Related Topics:

Posted on Nov 22, 2017

Gauges go up and down with turn signals on

Gauges, tach and speedometer go up and down with turn signals on.(light on up light off down). truck runs like it has a choke on but then all the sudden starts running fine. turning on the head lights affects it by making the motor stop sometimes and run bad all the time. the battery is new. the alternater puts out 14+ volts.

1 Answer

Luke Gerald

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

  • Contributor 22 Answers
  • Posted on Nov 22, 2017
Luke Gerald
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that hasĀ over 10 points.

Joined: Apr 18, 2013
Answers
22
Questions
1
Helped
3558
Points
60

You have a bad ground cable or strap. Check all body grounds.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 18, 2008

SOURCE: Speedometer and Tach guages stop working at the same time

Its your odemeter cable its run out of luburcation and its getting hung up. Reluburcate the cable

Ad

simidrm45844

  • 159 Answers
  • Posted on Jan 12, 2009

SOURCE: 1997 dodge ram 1500 gen light comes on and the battery gauge jump

Replace the alternator if it's output is too low the gen light will come on,could also be loose or dirty connections at alt amd bat

Anonymous

  • 84 Answers
  • Posted on Feb 07, 2009

SOURCE: 2000 GMC Sierra cranks wont start

Hello, 9-10 volts is not enough to keep a modern vehicle running. Taking in consideration the age and model of this truck, it could easily be an alternator failure.
I hope this helps.
CYA Gator241

Anonymous

  • 4669 Answers
  • Posted on Feb 27, 2009

SOURCE: 97 town and country LXI mini van speedometer and tach not working

the cluster needs to be calibrated to the pcm before the speedo and tach will work. You will have to take it to the dealer to have it done. The last time I had to do it, it cost me 70 dollars.

jimbo647898

  • 21 Answers
  • Posted on Jul 04, 2009

SOURCE: When I start my 2000 GMC Sierra the gear shift

someone has cut the dash off you need to go to the information center and press menu it will give the options to cut it on or off

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My instrument panel lights up but nothing on it works. Speedometer, tach, gas gauge, nothing. All the message lights are on. In the odometer/tripmeter window in says: no bus. Truck runs just fine.

There may be a problem with the connection or the wiring harness between the instrument cluster and the body computer.
No Bus means no signal or power on the line between the two computers.
0helpful
1answer

Every thing works no gauges working

None of my gauges will work, but my turn signal indicators ...

www.americanautowire.com/.../none-of-my-gauges-will-work-but-my-tu...
None of my gauges will work, but my turn signal indicators, high beam ... As we've discussed previously, anything electrical needs a 12 volt feed and ground to work. ... 09/28/2015 There are a number of new products coming in Nov/Dec this ...

my gauges quit working - CarGurus

www.cargurus.com > Questions > Ford > F-250 Super Duty

CarGurusSep 21, 2013 - my gauges quit working - My odometer, speedometer, fuel, tach, trip, and ... I tried fixing the wire and had the same problem....so I replaced the shift lever and everything is back to ... no gauges will work in dashboard 1 answer.

No dash gauges, but dash lights - Car Forums and Automotive Chat ...

www.automotiveforums.com > ... > Dodge > Caravan ' Voyager
Feb 6, 2010 - The dash lights work fine, so does everything else. The dash gaugesjust don't work. This is something that has been an intermittent problem ...
0helpful
1answer

Instrument cluster does not work.

Best practice is to leave pinpoint testing of the instrument cluster & (Delicate) P/C board to an expert .....

If you need further help, reach me via phone at https://www.6ya.com/expert/ralph_2f0886b7d6af32ce

0helpful
1answer

97 plymouth breeze speedometer,tach gauge,temp gauge,brake lights, dont work.

circuitry behind the gauge panel. you will have to pull the dash to see behind there and track the problem down
0helpful
1answer

Instrument cluster

Do an online search for speedometer repair places. You can get yours rebuilt for a fraction of the price of new or junkyard
1helpful
1answer

Turn signals on 2001 Chrysler Town & Country cause dash lights to come on and speedometer & odometer quit working

I would say its probably a short or a ground problem at the turn switch or a wire in that area. you need a test light and probably a multi meater and some nohow a ground or wireing problem can even drive a master teck crasy.
2helpful
1answer

Twice the engine light, airbag light, came on as well as both the tach gauge and speedometer gauge went dead

the connectors on the back of the gage panel are loose or coroded. should get a no bus signal in the dash panel.
0helpful
1answer

Speedometer and Tach guages stop working at the same time

Its your odemeter cable its run out of luburcation and its getting hung up. Reluburcate the cable
Not finding what you are looking for?

126 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...